How high should wood stove pipe be above roof?

3 feet
The 3-2-10 Rule. The chimney opening above the roof of a sticks and bricks house should be 3 feet above the roof line, or 2 feet above any part of the building within 10′, whichever is higher. For most small structures like small cabins and tiny homes, the tallest part of the structure is within 10′ of the chimney.

What is the purpose of a chimney support box?

Ceiling support boxes provide a safe passage for the double-wall chimney pipe through the attic, cathedral ceiling, or floor in multi-story homes. They also support the weight of the chimney stack.

How high should a flue be above the roof?

The minimum chimney height recommended for minimum performance of wood burning and multi fuel appliances is 4.5 m from the top of the appliance to the top of the chimney. It is best to position the chimney, so that it goes straight up as near to the roof ridge as possible.

How high should a chimney extend above the roof?

This rule means that your chimney’s shortest side needs to be at least 3 feet above the roof penetration, and its top has to be 2 feet higher than any part of the building that’s within 10 feet. There a number of reasons behind this rule.

How do you attach a stove pipe to the ceiling?

Attach the female end of the single wall stove pipe to the male end of the universal adapter. You can use a level to make sure that your stove pipe is straight all the way down to the wood stove connection. The last step is to put the trim collar around the ceiling support box. With the screws provided, anchor it to the ceiling.

How do you find the ceiling joists for a gas stove?

Hang a chalk line or plumb bob from the ceiling so the lower end aligns with the center of the flange where the pipe attaches at the top of the stove. Mark the ceiling at this location and circle the mark for reference. Find the ceiling joists at each side of the circled mark, using a stud finder.

How do you attach a ceiling support box to the ceiling?

The ceiling support box will come with two brackets to mount to the ceiling joists. From the attic, slide the ceiling support box through the opening and attach the ceiling support box to the ceiling joists. Now that we have penetrated through the ceiling, we need to mark the hole to penetrate through the roof.

Can you install a wood stove with chimney pipe?

You will be able to install a wood stove with chimney pipe after reading this instructable and you can do the job with common household tools. Installing a Class A Insulated Double Wall Chimney Pipe through a flat ceiling can be done by DIY homeowners and is an economical, efficient way of heating your living space.