How do you set up a Multi TV decoder?

Multi TV decoder installation guide

  1. Press Menu.
  2. On installation, press OK.
  3. Select manual search and press OK.
  4. Edit the frequency by pressing the green button on the remote.
  5. Choose modify and press OK.
  6. Enter the number 12522 and press OK.
  7. Select polarization.
  8. Press the right button to change to vertical and press OK.

How do I update my Multi TV decoder?

To update this decoder, follow the step below:

  1. Press the menu button.
  2. Move down to DVB-s and click okay on it.
  3. Type the password as 0000.
  4. Continue by choosing dish setting option.
  5. Press the yellow key on the remote to edit TP.
  6. Move down to symbol and right 27000 on the box provided.
  7. Move down to yes and click okay.

How do I scan my Multi TV decoder?

How to re-scan Multi TV digibox

  1. Press Menu on your Multi TV remote control.
  2. Select Installation.
  3. Select Install satellite and press OK.
  4. Press the green button on the remote control.
  5. Your Digibox will start the scan automatically and find all those great Television and radio channels.

How do I activate my Multi TV HD?

How To Activate Your Multi TV HD plus decoder Account

  1. Simply dial *879#.
  2. Press 1 to activate your free trial.
  3. Choose option 5 to add your HD+ account number.
  4. Enter the first 6 digits of your HD+ number as prompted.
  5. Now enter the last 6 digits.
  6. Press 1 to confirm your number.
  7. Select 1 to activate your HD+ account.

How do I scan for satellite channels in Ghana?

Therefore, you must ensure your satellite dish is facing the east during Multi TV installation….

  1. Press MENU.
  2. On INSTALLATION press OK.
  3. Select MANUAL SEARCH and press OK.
  4. Press the green button on the remote to edit the frequency.
  5. Select MODIFY.
  6. Press OK.
  7. Input 12522.
  8. Press OK.

How do I scan for channels on quality decoder?

Quality box decoder

  1. Press MENU.
  2. Scroll down to DVB-S, Click OK.
  3. Input 0000 and press OK.
  4. Select DISH SETTINGS.
  5. Click the YELLOW BUTTON on the remote to edit TP.
  6. Scroll down to SYMBOL RATE and key in 27000.
  7. Scroll to YES and click OK.
  8. Scroll to SERVICE SEARCH, click OK.

How do I search for channels on my decoder?

How do you scan channels on a Multi TV decoder?

How do I scan a new decoder?

You can equally scan your decoder for new channels by using the steps below.

  1. Use the DStv remote.
  2. Press the menu button on the remote.
  3. Go to the menu.
  4. Select satelite installation.
  5. Make sure the DStv signal indicator is on for the frequency you are scanning.
  6. Scan the frequency for new channels.