How do you set the timer on a DeLonghi Dragon 4?

Push and hold the timer button for 5seconds. Turn dial to select green (T1) or red (T2). Press dial to confirm.

How do you use the DeLonghi timer?

How to Use the Timer on a DeLonghi Magnum Heater

  1. Plug the heater into a working electrical outlet.
  2. Turn the dial to the right to set the current time.
  3. Press the tabs inward for the time you want the heater to run.
  4. Set any additional on and off times by pressing in other tabs corresponding to the time in the day.

Can I leave a DeLonghi heater on overnight?

In general, oil heaters are quite safe to leave on overnight. The main reason is they do not have an exposed heating element. They are constructed so that the surface doesn’t get too hot. Also, they have tip-over switches and built-in timers that will shut off the heater in certain circumstances, reducing fire risk.

How do you set the timer on a Delonghi Dragon 3?

To program the timer 1) Set the operating times by pushing in with your thumbnail to the outer rim, the notches on the dial corresponding to the period required (fig. 3) (each notch represents 15 mins.) 2) Make sure that the timer indicates the correct time (see instructions on setting the correct time).

How does the timer work on Delonghi heater?

The timer has as arrow on the center dial that needs to align with the current time of day when you are setting the unit. Then, you use the teeth to set the time you want the unit to be “ON” by pulling a section of teeth outward or move inward for “OFF” time. This can be set multiple times over a 24 hour priod.

Do Delonghi heaters use a lot of electricity?

It depends largely on the type of house, size of room and quality of insulation. However the maximum the heater will cost will per 1unit of electricity per hour, per kilowatt of heat. For example, if you have a1500 W heater the maximum it will use is 1.5 energy units per hour.

How long can electric heaters be left on?

If you have an upscale heater, you can easily leave it on for 10 hours or more without an issue. What is this? Most fire safety specialists suggest heating up a room for two to three hours before you sleep, then turning it off.