How do you reset the F20 code on a Whirlpool washer?

Removing the Error To remove the error display, press Pause/Cancel twice. If Pause/Cancel does not work, perform the following: Unplug the washer or disconnect the power for one minute. Plug in the washer or reconnect the power.

Why is my washer blinking F20?

Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error.

How do I fix error code F02 on Whirlpool?

Press the pause or cancel button on the Whirlpool washing machine to clear the F02 error code from the display, and try using it again. The error code is displayed when the washer takes more than eight minutes to drain, but may just be a glitch.

How do I fix error code F20?

F20 Error Code F20 indicates a water inlet problem—no water or insufficient water supply. Try the following method to resolve: Select PAUSE/CANCEL twice to cancel the cycle. Unplug washer or disconnect power.

Why does my washer say F 21?

If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.

How do I fix the F2 on my washing machine?

A stuck contact on the pressure switch can stop the advancement of the wash cycle and keep the water from draining. A few taps on the top of the switch with a screwdriver handle can release the contact and fix the problem causing the F2 error code.

What does fo2 mean on a washing machine?

a long drain time
The F02 error code on a Whirlpool washer indicates that the control detects a long drain time. This can be caused by excessive suds in the tub, a restriction or clog in the drain system, or by a number of other component failures.

What does F 21 mean on a Whirlpool washer?

a drainage problem
October 4, 2021. If your Whirlpool washer has an F21 error code, it indicates that your washer has a drainage problem. The good news is the issue can usually be resolved by simply clearing the drain filter or drain hose.