How do you reset the drum on a Brother HL-4150CDN?

Brother HL-4150CDN – Reset Drum

  1. Press the “+” key to find “Machine Info”.
  2. Press “OK”.
  3. Press the “+” key to find “Reset Parts Life”.
  4. Press “OK”.
  5. Press the “+” key to find “Drum Unit”.
  6. Press “OK”.
  7. Press the “+” key to reset the drum counter.

What is the drum on a Brother MFC printer?

What is the drum unit? The drum unit transfers the toner to the paper. The laser printer puts the toner on the roller called “The photosensitive drum” inside the drum unit, and then prints letters and images by fixing toner to the paper by heat and pressure.

How do you reset the drum on a Brother HL l8360cdw?

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:

  1. Make sure the machine is turned on.
  2. Press. (Settings) > All Settings > Machine Information > Parts Life.
  3. Press and hold Drum until the machine’s display message changes.
  4. Press Yes.
  5. Press (Home).

How do you reset the drum on a Brother HL L3270CDW?

Reset the Drum Counter (HL-L3270CDW) Press and hold for about five seconds. Press [Drum]. Select the toner color for the drum unit you just replaced. Press [Yes].

How do I clear the message Drum Error Slide the Green Tab ‘?

How to clear error message “Slide the Green tab on Drum Unit”?

  1. Take out the drum unit and toner assembly.
  2. Clean the electrodes with a soft cloth.
  3. Gently slide the green tab from side to side several times, and return it to the home position at the far left.
  4. Re-install the drum unit.

What happens if you don’t replace the drum in a printer?

Without a drum unit, the toner powder in the cartridge cannot be transferred onto the page. The two parts work together to create a print! You can’t have one without the other and expect the printer to work properly.

What does it mean when the printer says slide the green tab on the drum unit?

The message ‘Drum Error, Slide the Green Tab on the Drum Unit’ will appear when the drum unit is dirty or has reached the end of its life and needs to be replaced.