How do you read a York tonnage?

Look for first two numbers in the model number. They are divisible by 6 or 12, which represent the nominal BTU of the system in thousands. A ton of air conditioning equals 12,000 BTU, and 48 divided by 12 equals 4, so the data plate below indicates the system is 4 tons.

How do you read a carrier nomenclature?

Carrier/Payne/Bryant Carrier systems made in the last 20 years or so encode the week and year of manufacture within the first 4 digits. The first 2 are the week of the year (1-52) and the second are the year. For example 0199 would mean the system was made the first week of January in 1999.

Where is the model number on a York Furnace?

Locate the model and serial number label inside the cabinet of the furnace. The model number will be four letters, a dash, and then six more characters while the serial number is ten characters long.

What is my SEER rating York AC?

How To Find The SEER Rating. Head over to your cooling system and look for a yellow and black “energyguide” sticker, which can usually be located on the side of the condenser. If this sticker is still in tact, it will tell you the Seasonal Energy Efficiency Ratio in large numbers.

How do you find the tonnage of a roof top unit?

Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3-ton unit….How Can I Figure Out The Tonnage Of My AC Unit?

  1. 018 = 18,000 BTUs = 1.5 tons.
  2. 024 = 24,000 BTUs = 2 tons.
  3. 030 = 30,000 BTUs = 2.5 tons.

How many BTU is a York furnace?

York TM9E is a Two Stage Gas Furnace with up to 96% AFUE efficiency rating. This unit is available in different sizes from 40,000 BTU to 120,000 BTU.

How do you read the tonnage on a carrier unit?

Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3-ton unit. Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60.

How do you tell the tonnage of a carrier model number?

Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.

How do I find out what year my YORK furnace is?

How can I tell the age of a York air conditioner or furnace from the serial number? For York systems manufactured from October 2004 to the present, the first and third characters in the serial number will be letters, and the second and fourth characters will be numbers that indicate the year of manufacture.

How do I know what SEER I need?

Do the math. Take the BTUs divided by the SEER and then divide that by 1000 to see how many Kwh consumed each hour. Then multiply that by hours of operation annually and finally by cost of Kwh for that particular unit.