How do you program a rc27a remote?

Use the number pad in the center of the remote to enter in the first three-digit code on the list for your television. Do not hold any number down while pressing it and pause briefly between each number. When finished, press the “OK” button to save the code. The indicator light will turn off if the code is recognized.

What’s the code for RCA universal remote?

The TV codes are: 000, 006, 011, 019, 027, 034, 038 and 044. The VCR codes are: 000, 005, 007, 008, 028 035, 037, 054 and 069. The cable box codes are: 000 and 027.

How do I program my RCA converter box remote to my TV?

How to Program a RCA Converter Remote

  1. Scroll to the last page of the PDF file from the RCA Converter Box manual.
  2. Press the “PGM” button on the remote control.
  3. Point the remote at the device, and press the buttons on the remote to see if the programming code worked.

What does a RCA ATSC converter box do?

It will easily receive over-the-air TV broadcasts and convert them to analog signals that your current TV can display. It’s an easy hook-up – just plug in your antenna and connect to your television and you are set.

How do you program a basic RCA remote?

Press and hold the Code Search button on the remote. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a sweet new smart TV, press the key for TV). The light on the remote will blink once and then stay steady.

How do you hook up a digital converter to a TV?

Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.

How do I program an old RCA universal remote?

About This Article

  1. Turn on the device you want to control.
  2. Press and hold the button for the device.
  3. Press and hold Power while still holding down the device button.
  4. Release both buttons.
  5. Enter the brand code if you have it.
  6. Press the Power button to cycle through codes.