How do you hide the ends of composite decking?

The question is, how do you hide the ends of composite decking? There are several ways to go about it. Some of your options include picture framing, installing fascia boards, coating the ends with paint, using end caps and plugs, or edging your ground-level deck with stone.

Do I need end caps on composite decking?

End caps are a great way to protect any exposed ends of your Gronodec Premier composite decking boards as they create a barrier against moisture, dirt and insects.

How do you cover screw holes in composite decking?

For plastic or composite decking, use an epoxy filler to fill screw holes. Mix the epoxy with thinner and use a syringe to fill the holes. Allow the epoxy to dry, then sand it so that it is flush with the deck. Wear a mask while sanding because the epoxy dust is dangerous to breathe in.

Does Trex make end caps?

Trex® Rail End Cap Cover.

How do you make a composite deck plug?

Make Composite Deck Plugs

  1. Step 1: Hollow Punch Set. I thought I was stuck hammering shavings until I stumbled across a hollow punch set at a tool store.
  2. Step 2: Making the Plugs. Once the hollow punch goes all the way through, pull it out.
  3. Step 3: Finishing Up. Put the plugs over the screw heads and hit them with a hammer.

Is there a filler for composite decking?

For small scratches and surface marks, a Composite Decking Repair kit may be the best thing to help you fix your damaged Board. Repair kits often include wax or epoxy fillers to help remove/ cover up any scratched areas of your Deck.

What do you put around edge of decking?

Edge raised decking to add the standout factor Use a combination of low level planting beds, reflective water pools and sections of smooth stones to create a contemporary look that will really help your deck stand out. You can also use a variety of white, gray and black stones to get a contrasting effect for your deck.

Does Fiberon decking have end caps?

All Fiberon composite deck boards for the North American market are capped and made using pre- and post-consumer recycled content.