How do you fix a washer dryer combo?
How do you fix a washer dryer combo?
Washer Dryer Combo Troubleshooting Tips
| Issue | Solution |
|---|---|
| Washer won’t fill, rinse or drum will not turn | Remove shipping bolts and spacers |
| Drum does not fill, but water is flowing | Fix the drain hose at the correct height |
| Make sure the power cord is plugged into a proper power receptacle |
How do you reset a Haier washer dryer combo?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.
How do you fix a Haier washer that won’t spin?
Common solutions for: Haier Washer won’t spin or agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission.
How do you manually unlock a Haier washer dryer combo?
Power off the machine and wait around 3 minutes and the door will automatically unlock, then the door can be opened. If there is some water inside the machine please select “spin /drain” function and start to let the water go out of machine. Then power off the machine and wait around 3 minutes. The door can be opened.
Why has my washer dryer stopped working?
The first thing you should do if your washer won’t power on is check your home’s electrical panel for a tripped circuit breaker. If it’s not a tripped breaker, the problem could be with the outlet itself; it may need replaced by a qualified electrician. Alternatively, the washer motor could have overheated.
What is the reason for washing machine dryer not working?
Unplug the dryer and check the thermal fuse for continuity. Replace the thermal fuse if the multimeter measures no continuity. Check the exhaust vent because a clog in the vent likely caused the thermal fuse to blow. For dryers with a dial timer, a broken push-to-start switch can prevent the motor from running.
How do I fix FA error on my Haier washing machine?
washer door is not closed properly….This worked for our Haier front loading washing machine.
- Make sure that you unplug the washing machine.
- After unplugging push and hold the power button to get rid of any residual power stored if any.
- Check the hoses that connect to the water inlet valve (BOTH OF THEM).
What causes a washer not to spin or drain?
If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Why is my Haier washing machine not turning on?
If the washer overheats, the thermal fuse will blow. If the line fuse blows, the washer won’t start. To determine if the thermal fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it.
Why is my washer dryer locked?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).
What does FA mean on a Haier washing machine?
Water level sensor circuit problem
Haier Combination Washer/Dryer – Error Codes
| Fault Code | Description/Reason | Solutions |
|---|---|---|
| FA | Water level sensor circuit problem | Service is required. |
| FC | No feedback signal from driver unit | Service is required. |
| Fd | Dryer heating is abnormal | Service is required. |
| FE | Dryer motor is abnormal | Service is required. |
