How do you fix a GE garbage disposal that is stuck?

If the shredding plate is stuck, insert either a disposer wrench or a ¼ inch Allen wrench into the bottom of the disposer and wiggle the shredding plate back and forth until it moves freely. If the disposer does not have an opening at the bottom, insert a broom handle into the drain opening and try to wiggle the plate.

How do you reset a GE garbage disposal?

The reset button is a red button located on the bottom or lower back side of the garbage disposer. If the garbage disposer gets jammed and the motor overloads, the reset button will pop out and shut the disposer off.

How do I Unjam my Moen garbage disposal?

Reset Motor Before starting the garbage disposal, push the reset button. This is found in the opening towards the bottom of the garbage disposal, opposite the side the power cord comes out. Depending on the garbage disposal, the reset button may be set back slightly and may require a screwdriver to push it.

Why does my Moen garbage disposal not work?

Push the red reset button. The reset button is located on the opposite side of the power cord. If the garbage disposal does not turn on, it may need to be replaced.

Where is the reset button located on a Moen garbage disposal?

Before starting the garbage disposal, push the reset button. This is found in the opening towards the bottom of the garbage disposal, opposite the side the power cord comes out. Depending on the garbage disposal, the reset button may be set back slightly and may require a screwdriver to push it.

Why is my garbage disposal not running?

Check if the garbage disposal is plugged in. Press the garbage disposal reset button on the bottom of the unit, then try to switch on the unit. Check your main electrical panel to see if the circuit breaker to which the device is connected has tripped.

How do I get my garbage disposal to work again?

To reset garbage disposal follow these simple instructions:

  1. Make sure that the disposal switch is in the “OFF” position.
  2. Gently press the red button in to reset garbage disposal.
  3. Turn on a cold stream of water and turn the disposal switch to “ON” position, the disposal should now run again.