How do you develop Monobath?

Processing Methods for Df96:

  1. Push +1 development: 80°F (27°C) for at least 6 min. • Minimal agitation.
  2. Pull -1 development: 70°F (21°C) for at least 4 min • Constant agitation. 65°F (18°C) for at least 6 min • Intermittent agitation.
  3. 3200 speed BW films: Above 90°F (32°C) for at least 4 min • Intermittent agitation.

How long does Df96 last?

Chemistry Reuse: A 1-liter bottle of Df96 can process 16+ rolls of film. Simply recombine used chemistry and add +15sec. for each roll previously processed until you reach 8 min. Once opened, it should be used within 2 months.

How do I use d96 developer?

If you’re familiar with mixing up D-76 or Perceptol then mixing up D-96 from powder is a simple task. Add the water, pour in the powder then top up, all while mixing until the powder is fully dissolved into the solution.

Can you reuse Df96?

Df96 Monobath and Blix Reuse: You can simply start with much longer process times or recombine each liter of used chemistry and extend the process by at least 5% for each roll previously processed. If a film does not appear fully cleared, process for longer in Df96. It will not affect development.

Is developing film at home easy?

The good news is, however, that developing film at home is incredibly easy, requires few tools and little space, and gives you superior results and control over what many labs could ever offer.

What is a Monobath?

Df96 Monobath is a single-step solution with no need for stop bath, fixer, or any other chemicals. Monobath solutions were first proposed as far back as 1889, but only recently have the difficulties associated with their formulation been overcome.

How many times can I use film developer?

You have to add developer time for each roll. Memory says it was 13 1/2 seconds for each roll that had previously been souped in that gallon. It is a safe practice to continue for up to six months.

Can you reuse Colour film developer?

Color Film Developer: Reusable (though photo labs usually don’t) Color film developer, like black and white, directly affects the quality of the images, so it is rarely reused in professional settings. Most good labs opt to replenish the color film developer each time to give their clients the best results.