How do you connect two subwoofers to one output?

One option is a subwoofer splitter, you can use an RCA splitting cable, where you will plug one end into the Sub Out on your receiver, and now you have two Outputs that you can run individually to hook up 2 subwoofers.

Can you hook up 2 subwoofers to one receiver?

Option Two: If you have a Home Theater Receiver with two wired subwoofer preamp outputs, you can connect two subwoofers directly from the receiver (no RCA Y-adapter needed). Option Three: If you have a Subwoofer that has both an input and output, you can daisy chain two or more together.

How do I run dual subwoofers?

What to Know

  1. Easiest: Connect one receiver output to one subwoofer and the second one to the other subwoofer.
  2. Next easiest: Use an RCA Y-Adapter to send two parallel low-frequency audio signals to two separate subwoofers.

Can you run two different subwoofers together?

Yes. You can run two different subs. It’s optimal to run two of the same because in your case, the weaker sub may reach it’s limits before the stronger one. To build on what dstew100 said, try for optimal placement of the bigger sub up front with your mains.

Can you hook up 2 subs to a 1 channel amp?

Sure, two subs will take up more room, but what do you want — trunk space or bass? This setup is perfect for a mono sub amp. By wiring the two subs in parallel (see the diagram) you’ll show a 2-ohm impedance to the amp.

Can you connect 2 subs to a mono amp?

A mono block amplifier has only 1 channel and cannot be bridged. The 2 outputs of a mono block amplifier are there to easily connect multiple subwoofers. If you are not sure whether your amp is a mono block or a multi-channel model, look at the speaker terminals.

Can I connect 2 subs to a 1 channel amp?

you can also get another one of those amps and run one sub per amp at 2 ohms, be pushing 400w rms to each sub, which is what it can handle. You CAN run 2 speakers off of a 1 channel amp, just that amp is way too little power for your subs.

Is it OK to mix subwoofers?

The only way to approximate that while you’re mixing is to have a subwoofer to reproduce that low end. In this case, you probably will want to turn up your subwoofer to the point that it makes your mixes bass heavy so you can mix appropriately for the kind of sound system that your song will be played on at the club.

Can you power 2 subs with a mono amp?

This setup is perfect for a mono sub amp. By wiring the two subs in parallel (see the diagram) you’ll show a 2-ohm impedance to the amp. Mono amps are built for just this kind of situation, so you’ll get maximum power output from your amp investment. Check the diagram below for how to hook it up.