How do I update my Meade Soundstar?

When downloading is complete, double click on the saved file to start the installation. Follow the instructions provided to install Autostar Update (ASU) on your machine. When installation is complete, start ASU by selecting “Start Menu” -> “Programs” -> “Meade” – > “AutoStar Updater”.

How do you focus a Meade AutoStar telescope?

In order to reach focus your first time out you will need to turn the focus knob several revolutions (20-30 revolutions for the ETX-60/70AT) before the telescope will focus on objects in the night sky.

How do I reset my Meade Autostar controller?

*Problem* If Autostar does not display messages, turn the power off and then back on. Also, check the batteries or other power source. If the beep sounded and the screen is difficult to read, press MODE (3) and Autostar resets the screen to factory settings.

Can I upgrade my Meade telescope?

To upgrade your Autostar version for ANY of the Meade GO TO telescopes that are capable of upgrading (ETX 90, 105, 125, LX 90, LXD55s, and the LX200 GPS scopes) you will need to install the current (or user preferred) firmware.

How do you use an old Meade telescope?

Aim the telescope at the target. Look at the target through the telescope’s finder. Center the object in the field of view by moving the telescope up or down, and left or right. Insert a low-power eyepiece into the focuser to observe the object at low magnification.

Why can’t I see out of my Meade telescope?

If you are unable to find objects while using your telescope, you will need to make sure the finderscope is aligned with the telescope. The finderscope is the small scope attached near the rear of the telescope just above the eyepiece holder. This is best done when the scope is first set up.

What is Autostar Suite?

An AutoStar Suite Software CD-ROM is included as standard equipment with each LXD-75, LX90, and LX200 telescope. This software package integrates the telescope with a Windows-based PC or laptop computer for an enhanced range of performance features.

How does the Meade Autostar work?

The open architecture of the Meade Autostar permits the update of operating software, the loading of events such as comets, satellites, and minor planets, and allows you to share or “clone” this information with other Autostars.

What version of Autostar Updater does Meade envisage support?

AutoStar Updater 5.9 or greater can detect either version and load the appropriate firmware. Envisage Version 7.08x is Meade’s DSI camera control software. This latest version supports the DSI line of cameras on the following platforms:

How do I update the Autostar hand controller software?

#497 AutoStar hand controller software update. Version 43Eg (479 KB) is available. To get this new version, use either the 43Eg link to download and unzip the file to the Ephemerides directory of the Autostar Update (ASU) installation directory; or use ASU and press “Upgrade Autostar Software Now” and ASU will download and upgrade the handbox.

How do I install the correct Autostar code?

If you have an active Internet connection and your telescope with Autostar is connected using the appropriate cable as listed above, ASU will detect and install the correct Autostar code directly from Meade’s web site via the “Upgrade Autostar Software Now” button.