How do I update firmware with intelligent Provisioning?

On the Intelligent Provisioning home screen, click Perform Maintenance. Select Firmware Update from the maintenance options. The system searches for firmware on the source configured in the System Software Update settings. This might take a few minutes; wait for the display to generate the results.

How do I update my HP ProLiant firmware?

Go to https://www.hp.com/go/spp.

  1. Select Download >>.
  2. Select >> Current Version.
  3. Select >> Download next to the Complete ISO Image selection.
  4. Enter your HP Passport user ID and password.
  5. Follow the instructions to download the SPP ISO file.

Should I upgrade or install intelligent Provisioning?

Press F10 to reboot the server….Details

  1. Download Intelligent Provisioning. Click here to download Intelligent Provisioning .
  2. Select an Operating System (Example: Windows 2008 R2).
  3. Click on HP Intelligent Provisioning Recovery Media.
  4. Click Download button to download the HP Intelligent Provisioning Recovery Media.

How do I reinstall intelligent Provisioning?

Install Intelligent Provisioning Recovery, by performing the following steps:

  1. Insert the USB Key and power up the unit.
  2. To boot from the USB key, press F11 and select Option 3: One Time Boot to USB Drive Key.
  3. The system will boot from the USB Key and install IP Recovery.

How do I enable F10 on my HP server?

Enabling or disabling the Intelligent Provisioning F10 prompt

  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Intelligent Provisioning (F10 Prompt).
  2. Select a setting.
  3. Save your setting.

What is HP Intelligent Provisioning?

Intelligent Provisioning is a server assistance tool that is simple to use, offers fast deployment, and provides flexibility on how to deploy servers. Intelligent Provisioning is an embedded solution in most. Intelligent Provisioning increases simplicity because there is no need for media (no SmartStart CDs required).

How do I reset my HP Intelligent Provisioning?

To use the Erase Utility:

  1. On the Intelligent Provisioning home screen, click Perform Maintenance.
  2. Select Erase Utility from the maintenance options.
  3. Select the desired erase option for each device.
  4. Click Erase.

How do I install and reinstall intelligent provisioning IP?

How do I enable intelligent provisioning in BIOS?

To re-enable Intelligent Provisioning:

  1. Reboot the server and, when prompted, press F9 to access the UEFI System Utilities.
  2. From the System Utilities screen, select System Configuration → BIOS/Platform Configuration (RBSU) → Server Security → Intelligent Provisioning (F10 Prompt) and press Enter.
  3. Select Enabled.