How do I setup my TP-Link Extender TL-WA701ND?

Connect the computer to the AP with an Ethernet cable. Open the web browser and type the IP address of the access point (Default is 192.168….How to configure TL-WA701ND V2, TL-WA801ND V2, TL-WA901ND V3 or TL-WA7210N as a repeater?

  1. LAN IP: 192.168. 0.1.
  2. SSID: test ABC.
  3. Encryption Type: WPA2-PSK.
  4. Passphrase: 11667063.

How do I setup my TL wa801n?

Steps below describe the way to access the configuration menu to setup and deploy TL-WA801ND in the network.

  1. Power up the access point (TL-WA801ND).
  2. Manually assign a static IP address to the computer in 192.168.1.x range with subnet mask of 255.255.255.0.
  3. Connect the computer to the LAN port of the access point.

Can I use TP-Link router as wifi extender?

But what happens if your home is too large for a single Wi-Fi router to cover? If that’s the case, you can always get another TP-Link Wi-Fi router and use it as a repeater. That means you will get to extend the coverage of your primary router, so it covers the entire house.

How do I reset my TL wa801n?

Reset the access point to its factory default settings: use a pin to press and hold the Reset button until the Power LED starts blinking, then release the button.

What is secondary connection in TP-Link router?

Using TP-Link router when establishing connection through PPPoE a secondary address entry is made in TP-Link router (Secondary address is DHCP IP assigned to device connected to LAN) and WAN address is allotted to access internet. Keep in mind both of these address are of different networks.

Does a repeater have an IP address?

You need to configure your computer’s IP address in the same subnet with the REPEATER. By factory default, the IP address of the REPEATER is “192.168. 1.1”, so you should assign an IP address like “192.168. 1.