How do I setup my Linksys wireless G?

How to Set Up a Linksys WRT54G Wireless G Router

  1. Step 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router.
  2. Step 2: Connect Your Computers.
  3. Step 3: Connect the Power.
  4. Step 1: Log In.
  5. Step 2: Open Wireless Settings.
  6. Step 3: Name the Network.
  7. Step 4: Set Up Security.

How do I setup my Linksys wireless G 2.4 GHz router?

Click the Wireless tab.

  1. Under the Basic Wireless Settings sub-tab, select Manual.
  2. NOTE: Select either the 2.4 GHz or 5 GHz band.
  3. For the Linksys Wi-Fi Routers, you may enable either the 2.4 GHz or 5 GHz band, or both by setting the Network Mode to your desired standard (i.e. Mixed, Wireless-N Only, etc.).

How do I reset my Linksys E8350?

There are two ways in resetting the Linksys E8350 to factory defaults:

  1. Press and hold the Reset button located at the back panel of your router for 10 seconds.
  2. Log in to the router’s web-based setup page then go to Administration > Factory Defaults > Restore Factory Defaults.

How do I reset my Linksys Wireless G?

QUICK TIP: For router models such as the Linksys Wireless-B and Wireless-G routers, press and hold the Reset button for 30 seconds. QUICK TIP: Observe the Power light of the router while pressing the button. It should blink or flash as an indication that the router is properly resetting.

How do I switch my router from 5ghz to 2.4 GHz?

Go to Gateway > Connection > Wi-Fi. To change your Channel Selection, select Edit next to the WiFi channel (2.4 or 5 GHz) that you’d like to change, click the radio button for the channel selection field, then select your desired channel number.

How do I change the settings on my Linksys wireless router?

You can click here for the video tutorial.

  1. Access your Linksys Smart WiFi Cloud Account.
  2. Click Wi-Fi Settings on the left navigation pane under Router Settings.
  3. Under the Basic tab, click Edit beside Wi-Fi Settings.
  4. Enter your desired Wi-Fi name and Wi-Fi password in the fields provided.

What happens if I press the reset button on my router?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.