How do I setup my Fritz Box 7360?

How do I install and configure my FRITZ!Box 7360 modem

  1. Step 1 – Opening the web interface.
  2. Step 2 – Language choice.
  3. Step 3 – Regional setting.
  4. Step 4 – Reboot.
  5. Step 5 – Set the Administrator password.
  6. Step 6 – Welcome screen.
  7. Step 7 – Leaving the wizard.
  8. Step 8 – Wizards.

How do I access my fritzbox?

You can either enter http://fritz.box or the IP address of the FRITZ!Box (http://192.168.178.1 in the factory settings) to open the user interface. In addition, you can always use the emergency IP http://169.254.1.1 to access the FRITZ!Box. It is not possible to open the user interface via the guest access.

How do you set up a Fritz box cable?

Configuring the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password on the bottom of the device and click “Log In”.
  3. Click “Internet” and then “Account Information”.
  4. Select “Cable modem or internet router” from the drop-down list “Internet connection via”.

How do I reset my Fritz box Wi-Fi?

  1. Plug a phone device into either ‘FON 1’ or ‘FON 2’ ports of your modem.
  2. Dial the following numbers ‘#991*15901590*’.
  3. Wait for up to 30 seconds and your modem will begin to reset to its factory settings.

How do I find my fritzbox WiFi password?

The FRITZ!Box password is located on the bottom of the FRITZ!Box. With the FRITZ!Box password, you can access the user interface on all of the devices connected to the FRITZ!Box. To connect a device via Wi-Fi, you need the Wi-Fi network key that is also on the bottom of the device.

How do I reset my Fritz box?

Go to System on the left menu and select Backup in a drop-down list. Hit Factory Settings tab and click on Load Factory Settings. The FRITZ!Box will start loading factory settings, and its LEDs will start flashing.