How do I set up SPA122?

Procedure

  1. Using a LAN/Ethernet cable, connect the computer to the yellow Ethernet (LAN) port of the SPA122.
  2. Open Internet Explorer browser (IE is required to ensure the adapter’s configuration page displays properly).
  3. Log in: admin / (administrator password)
  4. Click Voice > Provisioning.
  5. Click Submit.

How can you get the IP address for a Cisco SPA122 ATA?

At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration. At the voice prompt menu, enter 210 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.

How do I provision a Cisco SPA122?

From the Computer:

  1. Open a web browser, and navigate to the IP address for the SPA.
  2. Click on the Admin link on the top-right (the default login is admin with no password) , then click Advanced in the top right corner of the page.
  3. Under the Provisioning tab on the top, make sure Provision Enable is set to Yes.

How do I set up my ATA adapter?

Step 1 Connect the network cable to your network and to the NETWORK port on the ATA. Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine). If connecting a fax machine, connect it directly to the ATA.

How do I access Cisco ATA?

Enter the old password (“admin”) and then enter the new password. From a factory default baseline on a Cisco 192 ATA device, plug an Ethernet cable into to the Ethernet slot of the device. Enter this IP address into your browser 192.168. 15.1 to be prompted for login.

How do I reset my SPA122?

1 Reply

  1. Plug in power adapter.
  2. Plug in a phone to ‘Phone 1′ port of the SPA122.
  3. Dial ****
  4. You should hear ‘Configuration Option Menu’
  5. Dial 73738# (RESET#)
  6. Press 1 to confirm the reset.

How do I log into network configuration utility?

To open the web-based configuration utility: Open a Web browser. Enter the IP address of the WAP device that you are configuring in the address bar on the browser, and then press Enter. The Login page opens.

How do I program a Cisco SPA112?

Setting up the Cisco SPA112

  1. Open a web browser and enter the IP address of the phone adapter in the address bar, then press Enter.
  2. Enter the username of the device in the Username field.
  3. Enter the password of the device in the Password field.
  4. Click Login to enter the web configuration utility.

What is ATA configuration?

The configuration of ATA is stored in the “SystemProfile” collection in the database. This collection is backed up every 4 hours by the ATA Center service to files called: SystemProfile_timestamp. json. The 300 most recent versions are stored.