How do I set the time on my iHome clock id38?

Setting Time and Calendar Manually Press and hold the Time Set/Sync Button located on the top of the unit until “SYNC ON” or “OFF” flashes on the display, (if “SYNC ON” appears, press the + or – Button to toggle to “OFF” setting). 2. Press and release the Time Set/Sync Button. The time display will flash.

How do you set the iHome clock manually?

Press and Hold the Time Set Button located on the back of the unit until the display flashes. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The PM indicator appears to the left of the display; there is no AM indicator.

How do I reset my iHome clock radio?

To do so, turn the unit ON and press the end of paperclip or similar into the reset port on the back of the unit for less than 2 seconds to reset it without clearing Bluetooth settings. The unit will reset and power back on. (If pressed for longer than 2 seconds, the unit will reset but will not power back on.)

How do I connect my iHome Bluetooth radio?

Press and hold the EQ/Pairing Button on the top of the unit for 2 seconds to begin pairing the unit with your device. The Bluetooth icon will flash on the display, indicating pairing attempt. “iHome iBT97” should appear on your device’s menu.

How do I program my iHome alarm clock?

Press and hold the or Button until the alarm icon flashes, the alarm time flashes on the lower part of the display and a beep sounds. Press and release the – or + Button to set the alarm time (press and hold for faster setting). Remember to set the correct AM or PM time.

Why is my iHome alarm clock not working?

Improper battery installation will cause the alarm battery to fail. Make sure the battery was installed correctly by opening the battery housing compartment. Use the iHome iD95 Backup Battery Replacement to check to see if the positive (+) side of the battery is facing outwards.

How do I connect my phone to my iHome Bluetooth?

Pairing your iHome Speaker with an Android Device Go to Settings –>> Go to Connections –>> Press Bluetooth to turn on. Go back to your Android device and you should now see iDM12 on the screen. Press it to pair.

How do I turn off the alarm on my iHome alarm clock?

How to Turn Off the Alarm on an iHome

  1. Set the correct time on the iHome clock.
  2. Check the lower part of the clock display for the alarm time.
  3. Press the alarm button once to activate the alarm review mode.
  4. Press the alarm button once more during the alarm review mode to turn off the alarm.

How do I set the time on my iHome clock radio idl43?

Response from iHome:

  1. Press and hold the Time Sync Button located on the top of the unit until “AUTOSYNC ON” or “AUTOSYNC OFF” flashes on the display,(if AUTOSYNC ON appears, press the + or – Button to toggle to AUTOSYNC OFF setting).
  2. Press and release the Time Sync Button.
  3. Press and release the Time Sync Button again.