How do I select a device in Quartus?

From the Quartus II menu select “Assignments” -> “Devices…” set the “Enable device-wide reset (DEV_CLRn)” and “Enable device-wide output enable (DEV_OE)” check boxes. In this way you enable the “DEV_CLRn” key and the “DEV_OE” switch in the “The Thing” board.

How do I install a Quartus device?

To install the software on your own PC, grab the Quartus 14.0 software from the EE271 website. You’ll need both the Quartus software tarfile, and the CycloneV qdz file. Save these both to the same directory. Extract the “tar” file (I use 7zip, but other tools are out there), and then run the setup.

What is Quartus software used for?

Software information Quartus Prime enables analysis and synthesis of HDL designs, which enables the developer to compile their designs, perform timing analysis, examine RTL diagrams, simulate a design’s reaction to different stimuli, and configure the target device with the programmer.

What is FPGA design?

A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing – hence the term field-programmable.

How do you add a Cyclone V Quartus?

Log into the and open a terminal window. Once the Quartus installation wizard starts, direct it to install in /opt/intelFPGA/ .. Under “Devices,” make sure “Cyclone V” is selected (the others are unnecessary). Let the installation complete; this will take a while.

How do you simulate a Verilog code in Quartus?

First make sure the location of the simulator is properly set. Go to Tools→Options→EDA Tool Options and set the ModelSim directory. Go to File→New→Verification/Debugging Files→University Program VWF (VWF = vector waveform file). When the “Simulation Waveform Editor” window appears click Edit→Insert→Node or Bus.

How do I run ModelSim in Quartus?

1. ModelSim* – Intel® FPGA Edition Simulation Quick-Start ( Intel® Quartus® Prime Standard Edition)

  1. Open the Example Design.
  2. Specify EDA Tool Settings.
  3. Launch Simulation from the Intel Quartus Prime Software.
  4. View Signal Waveforms.
  5. Add Signals to the Simulation.
  6. Rerun Simulation.
  7. Modify the Simulation Testbench.

Is Quartus used in industry?

Quartus has depth and broad range of industry and product experience that includes: Civil/Space, Defense, Aircraft/Transportation, Consumer Products, Optics & Photonics and Medical/Life Science.

Which type of device FPGA are?

Which type of device FPGA are? Explanation: Field-Programmable Gate Arrays (FPGAs) are reprogrammable silicon chips. In contrast to processors that you find in your PC, programming an FPGA rewires the chip itself to implement your functionality rather than run a software application. Thus, FPGAs are PLD devices.

Is an FPGA a microcontroller?

A field-programmable gate or grid array (FPGA) and a microcontroller are similar, but not the same. They are both essentially “small computers” or integrated circuits embedded in other devices and products.