How do I reset Schlage Lock?

Reset the Schlage lock by engaging the reset button if one is available, or by disconnecting the battery. Once the cover and housing are removed, if the button is there, simply press and hold it until the red light isn’t flashing anymore. Release it and wait until the lock resets itself and the light turns blue.

How do I reset my Schlage CO 200?

Resetting a CO200 / CO250 Series Lock back to Factory Default…

  1. Press and hold the Schlage button.
  2. After confirmation signals, release the Schlage button.
  3. Rotate the mechanical key within 10 seconds and hold.

How do you reset a Schlage lock without the code?

So first how to Reset Schlage Keypad lock?

  1. Disconnect the batteries.
  2. Press and hold the Outside Schlage Button.
  3. While holding the Outside Schlage Button, Reconnect the batteries.
  4. Release the Outside Schlage Button.
  5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User.

How do you open a Schlage lock with a dead battery and no key?

How do you unlock a Schlage Control lock that has a dead battery?

  1. Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.
  2. Wait for 1 red light and then 3 green lights with 3 beeps.
  3. Present a valid credential.
  4. Rotate the bolt throw away from the door edge.
  5. Replace the batteries.

How do I change my 4 digit Schlage lock code?

To change the default 4-digit code on a Schlage lock, follow these steps.

  1. Step 1: Find your programming code.
  2. Step 2: Enter your programming code.
  3. Step 3: Press the Schlage and number 1 button simultaneously.
  4. Step 4: Enter your new entry code.
  5. Step 5: Enter your 4-digit code again to confirm.

What happens if Schlage Lock runs out of battery?

Simply use the thumbturn to lock and unlock the door from the inside. Will the lock still work if the power goes out? Yes. All Schlage electronic locks are battery operated, so they will continue to work during a power outage.

How do you reprogram a Schlage lock without the code?

How do you change the 4 digit code on a Schlage keypad lock?

How do you open a Schlage Lock with a dead battery and no key?

How do you open a Schlage Lock on a dead battery?