How do I reset my Trane?

All Thermostat Models

  1. MAKE SURE THAT THE HVAC SYSTEM IS IDLE BEFORE PROCEEDING!
  2. Locate the switch for your thermostat in the breaker box.
  3. Flip the switch to the OFF position for 20-30 seconds.
  4. Return the switch to the ON position.
  5. The reboot process will take several minutes to complete.

How do you reset a Trane air conditioning unit?

Steps In Resetting Your Trane AC Thermostat

  1. Switch off the thermostat.
  2. Locate the circuit breaker.
  3. Turn off the air conditioner from the circuit breaker.
  4. Remove the Trane thermostat from the wall.
  5. Wait for a few seconds.
  6. Switch the air conditioner and the thermostat back on.

Why is my Trane AC running but not cooling?

Your filters may be clogged or dirty Clean or replace the filters. Consult your local Trane Comfort Specialist™ if you are unsure where the filters are located. Your thermostat controls may be set incorrectly Try turning the thermostat off and then on again. Reset to the desired temperature and see if that helps.

Why is my Trane AC unit not turning on?

You may have a tripped circuit breaker. Recommended Action: Check your home circuit breaker box and reset circuit breaker. Your thermostat/control may be off or set incorrectly. Recommended Action: Check to make sure your thermostat/control is on and set to cool.

Where is the Trane reset button?

Turn off the power and open up the control panel to access the reset buttons on these models. Next, lift the cover to the blower compartment, and you should see the reset button sitting next to the blower motor and blower wheel.

Where is the reset button on the air conditioning unit?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel.

Why is my air conditioner not cooling my house below 80 degrees?

Change the Filter If your filter is loaded with dust and dirt, it could be causing your air conditioner to not run effectively. If you haven’t changed your filter lately, now might be the time to do so. Filters keep dust and other contaminants from building up in your air conditioner.

Do Trane AC units have a reset button?