How do I reset my Sony projector lamp?
How do I reset my Sony projector lamp?
How to reset the lamp hours on the projector.
- Connect the AC power cord to the projector.
- Wait till the ON/STANDBY indicator light is red.
- Press the Reset button.
- Press the left-arrow button.
- Press the right-arrow button.
- Press the Enter button.
Where is the reset button on Sony projector?
For these projectors, a reset is generally done by pressing the following buttons on the control panel of the projector or on the remote:
- Press Reset.
- Press the left arrow button.
- Press the right arrow button.
- Press Enter.
How do I reset my projector lamp without a remote?
Press and hold the “Exit” button on the projector control panel for 5 seconds to call up the lamp counter. When the OSD menu appears, press the “MENU” button to reset the counter or press “Exit” to cancel. Press the < or > button; to set the lamp operating time to zero or press the “Exit” button to leave the menu.
How do I check the life of my Sony projector lamp?
Checking Lamp Life Give the projector a few seconds to warm up. Press your projector’s “Menu” to launch the on-screen menu. Navigate to the “Setup” or “Options” heading. Navigate through the menu and select “Lamp Life” or “Lamp Hours” to view a summary of the hours left on your bulb or the hours it has been on.
Why is my Sony projector blinking red?
WARNING: Flashes in red, ON/STANDBY: Flashes in red The temperature in the projector is abnormal. Check if the air filter is clogged, then clean or replace it. Check if the ventilation holes (intake/exhaust) are not blocked by the wall or an object and secure a sufficient gap.
How do you do a hard reset on a projector?
Press the menu button on the projector or the remote control and then navigate to the Advanced Settings. 2. Select to restore factory default settings.
How do you fix a projector that won’t turn on?
1. Projector Not Turning On
- Ensure the projector is properly plugged into a working outlet.
- Check the temperature lights to make sure the device hasn’t overheated and shut down.
- If you are using a remote control to turn on the projector, check the batteries.
- Be sure all of the projector latches are closed.
How do I check the lamp hours on my Sony projector?
Current projectors have an item in the menu called “Information” which includes lamp hours. If your projector is an older model, you can press and hold the Power ON/OFF button on the projector for approx. 20 seconds and the lamp hours will be displayed on the screen for a brief period of time.