How do I reset my Sitecom router 300n?

How do I reset my router to the factory settings?

  1. Hold down the OPS button on the router for 20 seconds. Some dual-band routers have two buttons; one for each frequency (2.4 GHz and 5 GHz). In this case, hold down both buttons for 20 seconds.
  2. Wait 2 minutes.
  3. The reset is complete.

How do I access my Sitecom router?

Sitecom Router Login

  1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
  2. Open your web browser of choice and type IP address of your Sitecom router in the address bar.
  3. Now enter the default username and password of your router by accessing the admin panel.

What is the default password for luxul router?

Top Luxul Logins

Username Password
admin admin 100%

How do I log into luxul access point?

Type 192.168. 0.10 (the most common IP for Luxul routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Luxul router is admin.

How do I reset my luxul?

  1. Press and hold the Reset button located on the back of the AP for approximately 10 seconds. Once the button is released, the AP will reset to factory defaults and reboot with a self-assigned IP address of 192.168. 0.10 or 192.168. 0.16 (depending model the model of AP).
  2. Reconfigure the AP as desired.

How do I configure my luxul router?

Setting up remote access

  1. Go to Status>Connected Clients.
  2. Find the IP Address of the DVR/NVR (example 192.168.
  3. Go to Firewall/Security / Port Forwarding.
  4. Enter DVR or NVR for Application Name.
  5. Wan Port 80.
  6. Lan IP “enter IP address for the NVR or DVR”
  7. Lan Port 80.
  8. Click Add.

How do I default my luxul XWR 1200?

n NOTE: A Luxul switch is recommended in conjunction with the XWR-1200 to increase the number of local ports available. ► Reset Button: Used to restore factory default settings. c CAUTION: Holding the Reset button longer than 10 seconds will result in a factory reset.

How do I reset my luxul ac3100?

► Reset Button: Used to restore factory default settings. c CAUTION: Holding the Reset button longer than 10 seconds will result in a factory reset. To restore factory defaults, press and hold the Reset button until the System LED stops flashing (approximately 20 seconds).