How do I reset my P-touch Brother label maker?

FAQs & Troubleshooting

  1. Turn off the P-touch.
  2. Hold down the “Shift” and the “R” keys.
  3. While holding down the “Shift” and the “R” keys, press the “On/Off” key or Power key once and then release the “Shift” and the “R” keys.
  4. “English” should be on the display. The machine has been initialised.

How do I reset my brother labeler?

Reset your label printer

  1. Turn off your label printer.
  2. Hold down Shift and the letter R key.
  3. While holding down the keys, press the Power key once to turn on your label printer.
  4. Release the keys.

Why is my Brother P-touch label maker not turning on?

Dead/Weak Battery If your label maker won’t turn on, you should make sure the batteries are not dead or about to run out. Replace the old batteries with six new AAA batteries. Make sure you replace them properly using this Battery Replacement Guide.

How do I reset my Brother P-touch 1180?

Reset the label machine

  1. Turn off the label machine.
  2. Hold down the Code key and the Clear (BS) key.
  3. While holding down the keys, press the On/Off key once to turn on the label machine.
  4. Release the keys.

How do I reset my Brother P-touch 1010?

How do I reset the P-touch back to its default factory settings?

  1. Turn off the P-touch.
  2. While holding down and , press to turn the P-touch back on.
  3. Finally release and . The machine has been initialised.

How do I reset my P-touch PT 1400?

How do I reset the machine to the default settings?

  1. Turn off the P-touch.
  2. While holding down and [R], press. two times.
  3. Release. and [R].

How do I get my P-touch label maker to work?

Instructions for a Brother P Touch Label Maker

  1. Insert batteries into your Brother P Touch Label Maker.
  2. Insert a new tape cassette into the cassette tape compartment on the bottom of the P Touch Label Maker.
  3. Press and hold the “Code” and “Style” button simultaneously to set the font style.

How do you change the font size on a Brother P Touch 1180?

1 Press . 2 Press and until SIZE is displayed, and then press (or ). The current size setting appears in the display. 3 Press and until the desired size setting is displayed.

How do I reset my brother 1900 label maker?

To reset the machine to the default settings, Turn off the P-touch. While holding down. and [R], turn the P-touch back on.

How do I reset my Brother P-touch PT d210?

How do I initialize and clear the P-touch to factory default…

  1. Turn off the P-touch.
  2. While holding down the [Shift] key ( / ) and [R] key ( ), press the [Power] key ( ) to turn the P-touch back on.
  3. Finally release the [Shift] key ( / ) and [R] key ( ).