How do I reset my MC9190 to factory settings?

Hold down the Power button for approximately five seconds. As soon as the MC9190-G starts to perform a warm boot release the Power button. A cold boot restarts the MC9190-G and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card.

How do I turn the volume down on my Motorola scanner?

The volume can be controlled by pressing the blue function key and then the H or M key. The display brightness can be controlled by pressing the blue function key and then the D or I key.

How do I adjust the volume on my RF scanner?

Information

  1. Open EasySet and select the proper scanner model.
  2. Go to ‘Operating settings’ > ‘Beeps/LEDs’ > ‘Volume’.
  3. Select the desired volume and the barcode will appear on the configuration sheet.
  4. Read the configuration Barcode.

What does the RF in RF scanner stand for?

Radio Frequency Scanner
RF Picking Systems. An RF scanner is a Radio Frequency Scanner which is a wireless handheld device that uses radio frequency wireless network to communicate with software to transfer information throughout the network.

How do I connect PDT to my computer?

Transferring Data Files from the PDT to the Computer

  1. On the terminal, go File Options – Send File, and Pause on Serial.
  2. On the computer, open the application ptfer.exe.
  3. On the Percon Portable File Transfer Screen choose Options.
  4. Choose Connect.
  5. Wait until “Comm…
  6. Choose the File menu item and select File Name.

How do I turn off the beep on my scanner?

Information

  1. Open EasySet and select the proper scanner model.
  2. Go to ‘Operating settings’ > ‘Beeps/LEDs’ > ‘Good read beeps’.
  3. Click on ‘None’.
  4. Scan the barcode.

Why does my symbol scanner keep beeping?

If your LS4278 barcode scanner has started beeping three times each time you scan a barcode, and the information is not being transmitted, the likely issue is the scanner lost connection with the base. One way to quickly fix this problem is to simply pair the scanner again to the base.