How do I reset my Canon iP2770 tool?

Hold down Resume button and press Power button. Keep holding down Power button and let Resume button go. Then Press Resume button 5 times then let BOTH buttons go. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

How do I reset my Canon printer counter?

Next, reset the cartridge ink counter:

  1. Unplug the power and the USB cables from the printer.
  2. Open the cartridge door and hold down the power button.
  3. Reconnect the power cables while still holding down the power button.
  4. Close the cartridge door and release the power button. The ink cartridge is now reset.

How do I fix my Canon iP2770 orange blinking?

The ink cartridge isn’t installed properly or isn’t compatible with this printer. Open the front cover, then install the ink cartridge properly or install the one compatible with this printer. The ink cartridge isn’t installed in the correct position. Make sure each ink cartridge is installed in the correct position.

How do I install Canon service tool?

Open one of the Canon service tool V1074 folders and then double click on service tool v3400.exe and follow the installation instructions. Wait until the installation process of the service tool download is complete. Open and repair your Canon printer! Finished.

How do you reset a counter absorber?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

How do I open a service tool?

Windows Server 2008 R2: Go to Start > Administrative Tools > Services. 2. Scroll through the list of services to find the service you are troubleshooting.

Why is my Canon printer blinking orange?

Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.