How do I remove write protection from a USB drive Windows XP?

Disable writing to USB drives

  1. Launch Regedit.exe and navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.
  2. Create a new DWORD value named WriteProtect.
  3. Double-click WriteProtect and set its data to 1.
  4. Exit the Registry Editor.

How can I remove write protection from my USB?

Double-click the WriteProtect key. To enable write protection, change the WriteProtect value to 1 and click OK. To disable write protection, change the WriteProtect value to 0 and click OK.

How do I fix write protected media?

How to Fix “Media Is Write Protected” in Windows

  1. Check Your Media for a Write Protection Switch.
  2. Removing Write Protection from Files and Folders.
  3. Run a Disk Scan.
  4. Run a Full Malware Scan.
  5. Check System Files for Corruption.
  6. Use Advanced Formatting Tools.
  7. Remove Write Protection With DiskPart.

What is disk write protected?

The “disk is write-protected” error in Windows 11/10/8/7 stops the operation of formatting, writing data, i.e., copy & paste files to the generic USB stick. It’s imperative to remove write protection on the drive.

How do I unprotect a USB drive using CMD?

Type “Attributes disk clear readonly” and press “enter.” Yes, “attributes” has an “s” and “readonly” is one word. Finally, wait for the write protection removal to finish, type “Exit”, then hit “enter” to close the command prompt window.

What is write protection on USB?

Write protection (also called read-only) can be physical or virtual. A USB drive is enabled with write protection has the ability to prevent new files from being written or old files being changed. Typically, this means you can only read the data which are already stored on the USB, but you can’t delete or modify them.

How fix USB write-protected using CMD?

Here are the steps that you can follow to format a write-protected (read-only) USB using the command lines below:

  1. Press “Win + R”, type cmd to open “Command Prompt”.
  2. Type diskpart and hit Enter.
  3. Type list disk and hit Enter.
  4. Type select disk 2 and hit Enter.
  5. Type attributes disk clear readonly and hit Enter.

How do you solve the disk is write-protected?

Quick Navigation:

  1. Solution 1: Check the drive for a physical lock.
  2. Solution 2: Disable write protection in Registry.
  3. Solution 3: Use Command Prompt to remove write protection.
  4. Solution 4: Check account permission.
  5. Solution 5: Make sure the USB drive isn’t full.
  6. Solution 6: Ensure your USB drive is free from virus.