How do I read my electricity meter Malaysia?

To read your meter, take note of the digits displayed which is the energy consumption in kWh. You will then need to submit this information back to TNB. For three phase meters, the screen will scroll across 3 pages 10 seconds at a time. To take the kWh consumption make sure the display reads kWh or kWh Imp.

How do I read my electric meter kWh?

To read a digital electric meter, read the series of large numbers near the center of your meter and write them down. If you wish to calculate how many kilowatt hours you’ve used in the last month, subtract the current reading from the previous reading, which should be stated on your most recent bill.

How do you read a smart meter meter reading?

To read the meter:

  1. press the ‘display’ or ‘display select’ button.
  2. press the ‘display’ or ‘display select’ button again until you see numbers followed by KWH.
  3. write down the number from left to right.
  4. ignore any zeroes at the beginning and any numbers after a decimal point if you have one.

How do I read my electric meter bill?

Always read the dials from the right to the left, starting from Dial A to Dial E. Read the number by the pointer of the dial. When the pointer is between two (2) numbers, the lower number is recorded. To compute your electric consumption, simply subtract the previous reading from the present reading.

What is my vend code?

You will find your vend code on any receipt, whether you receive it on paper, via text message or email. It may be anything between 20-60 digits long. If you have ignored notifications that your credit is low or if you wish to activate Emergency Credit early; press the ‘E-Credit’ button on the Payment screen.

How do you enter a voucher code on a prepaid meter?

Step 1: press * (the asterisk symbol) on the meter keypad . Step 2: Key in the numbers on the voucher code. Step 3: Press the #(hash) symbol on the keypad, after entering the voucher code. That is all.

Why does my electric meter have 3 readings?

Even though multi-rate meters look like a standard meters, a multi-rate meter will have small grey writing above the screen to tell you if the meter is multi-rate. The digital display will alternate between two or three readings (this depends on whether you are on an Economy 7 or Economy 10 tariff).