How do I program my Telus remote to my receiver?

Program Your Remote for Your Receiver

  1. Ensure that your television is turned on and is connected to the receiver.
  2. On the front of the receiver, press the Sys Info button.
  3. On your remote control , press and hold SAT until the SAT, VCR and AUX buttons light up.
  4. Release the SAT button, and it will begin to flash.

How do you set up a old universal remote?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on, and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

How do I sync my remote to my TV?

  1. Open the Settings screen. How to access Settings. If the remote control has a Quick Settings button:
  2. The next steps will depend on your TV menu options: Select Remotes & Accessories — Remote control — Activate the MIC button or Connect via Bluetooth.
  3. Follow the on-screen instructions. Notes:

How do I sync my TV remote without a code?

Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting.

How do I reset my TELUS Slimline 2 remote?

Reset your Slimline remote

  1. Press and hold the options button for at least 3 seconds. The remote’s mode light will flash twice if successful.
  2. Enter the code 1000 using the remote’s keypad. The remote’s mode light will flash twice if successful, indicating that the remote has been reset to the original factory settings.

How do I program my Classic remote for Optik TV?

Program your Classic remote for Optik TV How to program the TV button or synchronize the remote Not your remote? Select another remote In this article Program the TV button Synchronize the remote Purchase a new Optik remote Program the TV button If you need to reprogram your remote, use the remote code toolto find the right device code for your TV.

How do I Turn my TV on/off with the remote?

Turn on your television Press and hold the TVbutton, then press OK. When both are released, the buttons will flash 2 times Enter the TV codeon the number pad. The TVbutton will flash 3 times Press Powerand your television will now power off with your remote

How do I synchronize the remote to my TV?

Synchronize the remote Purchase a new Optik remote Program the TV button If you need to reprogram your remote, use the remote code toolto find the right device code for your TV. Once you have a code, proceed to step 1. Step:1of4 Select the type of device you want to control 1. Select the type of device you want to control 2.