How do I make my tp-link router an access point?

How to change a TP-Link router to AP mode

  1. Connect a computer to the TP-Link router and launch a web browser.
  2. Visit the following router configuration page: 192.168.1.1.
  3. You are prompted to enter a username and password.
  4. Click the Mode button on the upper-right corner, select Access Point and click Save.

How do I connect my tp-link portable?

Use the default Wi-Fi Name and Password printed on the Wi-Fi Info Card to connect to the router. Launch a web browser and type http://tplinkwifi.net into the address bar. Enter admin (in lowercase) for both user name and password. Click Quick Setup on the left panel, and click Next to start configuring the router.

How do I setup my tp-link WiFi extender?

via Ethernet Cable Plug the extender’s adapter into an electrical outlet near your router. Then turn on the extender and wait until the Power LED is lit and solid blue. 2. Click the Wi-Fi icon on the taskbar and connect to the extender’s network (e.g. TP-LINK_Extender_2.

What is the difference between wireless router mode and access point mode?

Best answer: The difference between router mode and access point (AP) mode is that router mode handles your home network’s creation and deals with internet traffic. AP mode allows you to extend the reach of your wireless signal by acting as a relay with a few simple software changes.

When should I use access point mode?

Access points are used for extending the wireless coverage of an existing network and for increasing the number of users that can connect to it. A high-speed Ethernet cable runs from a router to an access point, which transforms the wired signal into a wireless one.

How do I use a portable wireless router?

To use a portable Wi-Fi router, you only need to turn it on and follow the directions for connecting to it with a password as you would with a normal internet connection to a modem. Only those with the password may access the portable W-Fi, so there is no need to worry about security.

How do I connect my TP-Link Extender to my mobile hotspot?

How to use Tether to setup your TP-Link Router

  1. Step 1: Go to your smartphone’s wireless settings and connect to your router’s wireless network.
  2. Step 2: Open the Tether App.
  3. Step 3: Tap on your router Icon under Local Devices.
  4. Step 4: You may be prompted to log in or change the password.

What is AP mode in Wi-Fi?

Access Point mode is used to connect to wireless clients(wireless adapter cards) such as laptops, desktops, and PDAs. Wireless clients can only communicate to AP’s in Access Pointmode.

How do I reset my tp-link WiFi extender?

Locate the pinhole on the side where the reset button is. Insert a pin then press and hold the reset button until all indicator lights turn on momentarily. The range extender should now be reset to factory default settings.

https://www.youtube.com/watch?v=OmtDVNzP0DM