How do I know what size Kenmore washer I have?

Check the back of the washer’s control panel, the upper left-hand corner of the back of the washer or the lower left-hand corner on the front of the washer. The model number might also be on a sticker under the lid or on the inside right back corner — open the lid to check this location.

How old is my Kenmore washer by serial number?

Locate the serial number on a Kenmore washer made by Whirlpool. The second letter of the serial number identifies the year the machine was manufactured. For instance, “L” represents 2001, “M” means 2002 and, continuing through the alphabet, “Y” means 2009.

What size is a Kenmore washer model 110?

3.2 cu. ft
carolraden, most standard for the 110 series washer is 3.2 cu. ft.

What would cause a Kenmore washing machine not to agitate?

If the washer won’t agitate the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and transmission. If the washer won’t agitate the drive belt might have worn out.

How do you tell what size my washer is?

Most front-loading washers are generally between 4.2 and 4.5 cubic feet. Writers at DIY Forums report that the most accurate way to determine the size of your washer is to measure the tub and perform some simple calculations. The formula for determining the volume of your washer tub is: Pi x R x R x D.

How many cubic feet is a Kenmore model 110 washer?

Kenmore 110 Series Washing Machine series washer capacity is 3.2 cu. ft.

How do I know my washer capacity?

How to Calculate the Cubic Feet of a Washer

  1. Measure the depth inside the washer with a measuring tape.
  2. Measure the diameter of the tub.
  3. Divide the diameter by two, and square it.
  4. Multiply the number calculated in Step 3 by the depth of the tub.
  5. Multiply the number calculated in Step 4 by pi to determine the capacity.

How do you tell if your agitator is broken?

The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.