How do I know if Onzen is working?

Question 1: How do I know if the Onzen system is working? Conduct a “Sanitizer Production test” (Also known as a Smoke test). This procedure activates the Onzen System while de-activating the filtration pump so you can see the mist of gas bubbles produced by the Onzen System.

How do I reset my Arctic spa?

Remove the spa cover and allow water to cool. At 41.7 the spa should automatically reset. If spa does not reset, shut off power to the spa and call your supplier for a service.

What is Onzen?

Onzen is an all-natural, salt-water softening and maintenance system.

What is Onzen Arctic spa?

The Onzen™ Salt Water system is Arctic Spas® proprietary salt water system that produces sanitizer from Dead Sea salts through the process of electrolysis. Salt-water sanitizer generation has several advantages over traditional sanitizer methods.

Does salt water balance lower pH?

WARNING: Salt causes pH to rise, to help ensure pH can be managed within the target range, it is most important not to add the entire salt dose in one step. If all the salt is added in one dose it may increase the pH level to an unmanageable level that requires the spas water to be drained.

Does Arctic pure salt water balance lower pH?

Arctic Pure Adjust Down (pH Down) – 2 Sizes Available Add when PH is high. Proper PH balance is an essential part of spa maintenance. Recommended range is between 7.2-7.6. If your PH is higher than 7.6 the water will be alkaline and the chlorine…

Why is my Arctic Spa not heating up?

Spa does not heat: Check to see if the heat indicator is on or there are any error messages on the topside control panel. If the heat indicator is on and no error message appears contact your factory authorized dealer. Poor Jet Pressure: First check to see that the jet(s) are turned on fully.

What does Arctic pure salt water balance do?

The use of Salt Water Balance will help clear, prevent scale build-up, and increase bather comfort.

How much salt do I put in my Arctic spa?

So, on all hot tubs you’d want to use one capful of the Scale Free and add it directly to the water. When you do an all-weather pool, you’ll use three capfuls.

How much salt do I add to my Arctic Spa?

How do I raise the pH in my Arctic Spa?

Low pH – Can be raised by adding Adjust Up to the Spa water. High pH – Can be lowered by adding Arctic Pure Salt Water Balance, Adjust Down to spa water. Check the Free Chlorine Level to ensure it is in the target range.