How do I get my Xfinity xr2 remote to control my TV volume?

Press the TV Power button on the remote. If the TV turns off, you have successfully programmed your remote. Turn the TV back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device.

Can Xfinity remote control audio receiver?

Overview. You can program your Xfinity Voice Remote to work with your TV and audio/video (AV) receiver, like a sound bar and other pieces of audio equipment. If you have Xfinity X1 or Xfinity Flex, follow these steps to pair the remote with your TV Box – you can even control it when it’s out of sight.

How do I get my soundbar to work with my Xfinity remote?

How to Program an Xfinity Remote to a Soundbar

  1. Make your Soundbar the Default Output Receiver.
  2. Press the ‘Setup’ Button on Your Remote.
  3. Wait for the LED Light to Turn Green.
  4. Enter Soundbar Manufacturer’s Code.
  5. Wait for LED Light to Flash Green Twice.
  6. Test the Remote Works.

Why won’t my volume work on my Xfinity remote?

If your Xfinity remote volume is not working, verify that your batteries work. If they do, try unpairing and repairing your remote or resetting both the remote and tv box. What is this? If you’re sure there aren’t any hardware defects on the Xfinity remote, contact Xfinity customer care or replace your device.

How do I fix no sound on my Xfinity TV?

Go to the Main Menu. Select Setup. Select Audio Setup. Set the Default Audio Track to the desired language….No Sound on Some Channels

  1. Locate the device’s SAP or MTS setting.
  2. For SAP or MTS, change the setting to Off or Normal.
  3. For Stereo/SAP or Stereo, change the setting to Stereo or Normal.

How do I connect my Comcast remote to my Pioneer receiver?

If it has a Setup button:

  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote.

Can my Xfinity remote control my Bose Soundbar?

So, can you program any Xfinity remote to a Soundbar? Yes, all Xfinity remotes can be programmed to your Soundbar or another type of audio/video receiver.

Can Xfinity remote control TV and soundbar?

You can program your Xfinity Voice Remote to work with your TV and audio/video (AV) receiver, like a sound bar and other pieces of audio equipment.

Why does the volume not work on my Xfinity remote?

Where can you find list of TV remote codes?

Place the “Remote Control facing To The Universal remote control you want to replace”

  • Now press the “Setup Button” or “Magic”
  • Then enter the “Code” (You can find this in Instruction Booklet) for manual Programming
  • Now press any of the function which you want to “program” for instance “TV Volume Up”
  • How to Program Comcast XR2 remote control?

    Program Xfinity Xr2 Remote Using Setup Button If you look at the remote properly, you will see a Setup button at the lower part of the remote. The left-hand side of the 0 button. What you will do is to hold the Setup button for about 3 seconds until the LED light at the top changes from red to green.

    How to Program Comcast XR2 remote to Sony TV.?

    – Turn on your streaming device and TV. – Remove the pull tab on the back of the remote to activate it. – Point the remote at your TV and press the Microphone button. – Follow the instructions that come up on your TV to finish setting up.

    How to pair Xfinity XR2 remote with TV?

    Pair to a TV Box. To pair the XR2 Remote with a Non-X1 TV Box: While the TV is on, press and hold the Setup button on the remote for 3 seconds until the All Power button changes from red to green. Enter the first 5-digit code listed for the TV manufacturer. Note: The All Power button should blink twice.