How do I get my record player to work?

Put a record on your turntable and turn on the power. The power switch is usually located under the turntable, on top of the turntable, or on the motor. Remove the tonearm from its rest and make sure the cueing lever is in the up position. Or, if you have a fully automatic turntable, just move the start lever.

How do you play a vinyl record from the beginning?

To play a vinyl record from the beginning, you’ll need to line the stylus up with the outer grooves on the outside edge of the record. Then, lower the tonearm gently using the cueing lever, and the stylus will come into contact with the record’s playing surface.

Why won’t my record player make sound?

If your turntable has no internal preamp, ensure the external preamp is powered on and all RCA connections and grounding cables are secure. Confirm your speakers or amplifier are powered on. If the stylus protector(1) is still on the stylus(2), remove it before playback. Ensure the stylus does not come off with it.

Why is my record player not playing?

When it comes to direct drive record players, there are numerous possible reasons why the record player might be malfunctioning. These include debris and dirt stuck in the motor components and shaft. A jammed platter or a faulty on and off switch can create problems too.

Can you connect a turntable directly to speakers?

Answer: All Audio-Technica turntables have an analog output (RCA connection) which may allow the user to connect directly to powered speakers. If your Audio-Technica turntable has an internal RIAA preamp, you may connect the turntable directly to powered speakers.

How do I fix my record player not spinning?

Follow these steps if the turntable platter doesn’t spin:

  1. Make sure that the turntable is connected to the wall outlet.
  2. Move the lever on the motor drive gear inward to allow the platter to spin.
  3. Place the drive belt over the notched guide on the motor pulley.
  4. Re-sync the tone arm with the platter.

Why is my vinyl not playing?

While the most common factor is dirt or dust on the record, you may also have a problem with the balance. If the arm or the stylus cartridge is not balanced properly, then you may need to improve the balance. Depending on the record player you own, the process of re-balancing your arm or cartridge may vary.