How do I get my HP Laserjet p1102w back online?

Unplug the power cord from the wall outlet. Wait at least 60 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the rear of the printer.

How do I get my HP Laserjet Pro back online?

Restart your printer by turning it off, waiting 10 seconds, and disconnecting the power cord from your printer. Then, turn off your computer. Connect the printer power cord to the printer and turn the printer back on.

How do I get my laser printer back online?

How to get your printer back online.

  1. Turn off the printer and unplug the power cord from the printer itself.
  2. Turn off the computer.
  3. Wait 30 seconds and turn on the computer.
  4. Plug the printer power cord back into the printer and turn the printer on.
  5. Check the functionality of the printer.

Why is my HP printer showing as offline?

Your printer might appear offline if it can’t communicate with your PC. Here are some things to try to get your printer back online. Check to make sure the printer is turned on and connected to the same Wi-Fi network as your PC.

How do I fix my HP LaserJet printer offline?

Solution

  1. Step 1: Turn off Smart Install. On the printer control panel, open the Service menu.
  2. Step 2: Perform a power reset and check connections.
  3. Step 3: Check the ‘Use printer offline’ setting.
  4. Step 4: Use HP Print and Scan Doctor.
  5. Step 5: Reset the default print driver.

Why is my HP Laserjet showing as offline?

‘Offline’ typically indicates that the computer cannot communicate with the printer because it is either powered off, the USB cable is disconnected, or the printer is set to Use printer offline.

Why is my printer showing as offline?

For the most part, a printer will appear “Offline” if your computer is unable to establish communication with the device. This could be due to factors like loose cable connections, outdated printer drivers, problems with important system services, etc.

Why does my HP printer say offline?

Check the printer connection status: Make sure the wireless signal is on, and the printer is connected to the same network as your computer or mobile device. If your printer has a light next to a Wireless icon or button , make sure the light is on. If it is off or blinks, the printer is disconnected from the network.

How to install hp P1102w printer wirelessly?

Turn the product off.

  • Press and hold the wireless button and the cancel button,and then turn the product on.
  • Hold the buttons until all the lights blink in unison,and then release the buttons.

    • How to reset HP LaserJet P1102 printer?

    Turn the printer off, disconnect it from the wall outlet. Then reconnect it again and try the reset again. To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don’t release the two buttons until the printer stops making noise.

    How to change WiFi settings of HP LaserJet P1102w?

    In Finder,click Applications,and then double-click System Preferences .

  • Click Print&Fax (in Mac OS X v10.6) or Print&Scan (in Mac OS X v10.7).
  • Click Open Print Queue,and then click Printer Setup .
  • Click the Utility tab,and then click Open Printer Utility .
  • Click HTMLConfig .

    • Why would a hp wireless printer keep going offline?

    When your printer is paper jammed.

  • You might have set it offline earlier to save and print a document while not connected or prevent others,such as children,from mistakenly using it
  • If the cables are not connected properly
  • If you haven’t updated the Hp printer drivers or if the firmware has essential update lackings