How do I get my computer to recognize my SMART Board?

1. Click the SMART Board icon in the notification area beside the system clock (Windows) or in the Dock (Mac). 2. Select Control Panel > About Software and Product Support > Tools > Diagnostics.

How do I connect my SMART Board to WIFI?

Insert the USB Bluetooth Receiver into a USB port on your computer. The light on the USB Bluetooth Receiver will be red until a connection with the board is established. Press and hold the button on the Wireless Module for 5 seconds. A green light will start to flash.

Why is my SMART Board not connecting to my computer?

What are two all-purpose solutions to any technology problem? o Restart your computer. o Look at the cable from the device that isn’t working. Follow the cable to where it’s plugged in to your computer. Unplug the cable, count to ten, then plug it back in.

How do I connect my SMART Board to my phone?

  1. On your Android device, download and install the SMART Screen Share app from Google Play.
  2. On the display’s Home screen, tap Screen Share .
  3. Open the SMART Screen Share app on your device.
  4. Enter the display’s IP address on your device to connect.
  5. Tap Connect.
  6. Tap the black button to begin sharing your device’s screen.

Why is the SMART Board not working?

If your SMARTboard will not power on: Try using your remote to turn on the SMARTboard. 2. If the SMARTboard still won’t power on, unplug the board and wait for 10 seconds then plug back in. Please report this problem to the Whitesboro Tech Dept through HelpDesk, even if the SMARTboard will now power on.

Can you connect to SMART Board with Bluetooth?

Press and hold in the button on the Bluetooth dongle until the light starts flashing green. 3. Then immediately go to the SMART Board where its Bluetooth device is installed on the lower right back side of the board and press and hold the black (Sync) button until it starts flashing green.

Why is my SMART Board saying no signal?

My smartboard is reading “No signal input,” what should I do? Ian Berg (SMART Technologies Inc.) This likely means the video input is set to a port that does not have a device connected or else it is set to one with connected device that is powered off or in standby (sleep) mode.

Why is my screen not showing on SMART Board?

It’s easy! Windows computer: Go to the start menu and select “control panel.” From there click the tab that says “screen resolution” and check the box that either says “multiple displays” or “mirror display”. Hit apply!

How do you unlock a SMART Board?

To unlock the interactive whiteboard, just click the All Devices Locked floating tool again.