How do I fix my hot tub control panel?

No Display on Topside Control Panel

  1. Reset Spa Controller, power down and restart.
  2. Check for condensation under display glass.
  3. Check cable for crimps or any visible damage.
  4. Clean plug-in cable connections on both ends.
  5. Check power at Transformer on control circuit board.
  6. Check power at fuse on spa control circuit board.

How do I reset my Coleman spa?

Turn the spa off, wait 30 seconds and turn it back on again. The controls will be reset.

How do you unlock the Coleman Saluspa control board?

  1. Press the “Time” button on your hot tub operating panel.
  2. Push the “Jets 1” button.
  3. Push “Set down.” A “0” will appear on the screen indicating that the operating panel lock is off. The lock symbol will also disappear from the display on the operating panel.

What is the control panel on a hot tub?

The control system, or spa pack, is the brain of the hot tub. This nerve center controls the functions and equipment in the spa, like the jet pumps, filtration time, and heater. There are two types of control systems used in hot tubs: electronic, digital type systems and older-style mechanical air controls.

Is there a reset button on a hot tub motor?

There are generally two “hard resets” in hot tubs, the GFCI, and the high limit reset. The GFCI pops if there is any type of electrical short (such as water getting into the heating element, the reset on that can be in one of three places.

How do I reset my Saluspa hot tub?

Press the test button, the indicator turns off. 3. Press the reset button, the indicator turns red and the spa is ready for use.

How do I know if my control panel is bad in my hot tub?

Control Panel is Not Working If only a part is not working, look for error messages or blinking lights. As a first step, reset your breaker. If the problem persists, turn the breaker off and disconnect the panel to examine the circuit board. Turn the power on and check if the hot tub heats up or starts to filter.

What do the buttons mean on my hot tub?

Some larger hot tubs may have up to three jet buttons on the control panel that allow you to adjust the speed and strength of your jets. In most cases, pushing the button the first time will turn them on a low setting and pushing it again will increase the speed.