How do I fix my Braun Thermoscan POS error?

System Error – Wait 1 minute until the thermometer turns off automatically, then turn on again. If error persists reset the thermometer by removing the batteries and putting them back in. If error still persists contact your Welch Allyn representative. Insert new batteries.

What does POS mean on a Braun ear thermometer?

= position error
Luis Caceres (POS = position error) The infrared monitor cannot find a temperature equilibrium and allows no measurement – Clear the display by changing the probe cover. Ensure that the positioning of the probe is correct and remains stable. Score 0.

How do I reset my Braun IRT 4520?

IRT 4020: Clear the display by pushing the «start» button once. IRT 4520: Clear the display by pushing the «I/O» button once. Wait for the ready signal.

Why does my thermometer say po5?

The POS error means that the thermometer probe was not positioned securely in the ear, and an accurate measurement was not possible.

How do you reset a Braun Thermoscan thermometer?

reset the thermo- meter by removing the battery and then replacing it again. … call Braun Infoline (see page 2). Battery is low, but thermometer will still operate correctly.

Why does my Braun thermometer keep saying error?

Question: What should I do if my thermometer is displaying an Err message? Answer: This message displays when measured temperature is lower than 93.9 °F (34.4 °C) or higher than 108 °F (42.2 °C). Please make sure the protective cap is removed from the unit and Re-measure the temperature again.

How do you reset a Braun ThermoScan?

Why is my Braun ThermoScan not working?

Answer: A flashing display indicates a system error. We suggest waiting 1 minute until the thermometer turns off by itself and then turns on again. If the problem persists, reset the thermometer by removing the batteries momentarily.

What is err on Braun thermometer?

Why does my thermometer say error?

An Err message can appear on the thermometer’s display if: the sensor is too warm before powering on the thermometer. the temperature reading is incomplete. the thermometer has an internal problem.

How do you fix an err on a thermometer?

Remove the battery and clear the compartment of anything that could prevent the battery from making a good connection, like dirt or debris. Clean out any dirt with a dry cotton swab. Place the battery back inside of your thermometer, making sure the shinier, more reflective side is facing up. Replace the battery cover.

How to use Braun Thermoscan IRT 4520?

Modello IRT 4520: premere il tasto di «I/O» una sola volta. Attendere il segnale di pronto all’uso. Inserire bene la sonda all’interno del canale auricolare, quindi premere il tasto di inizio. Braun ThermoScan si spegne automaticamente dopo 60 secondi di inutilizzo.

What happens if my Braun Thermoscan does not work?

If the product should not perform to specifications within the warranty period, contact Braun ThermoScan’s Customer Support Department at 1 (800) 327-7226 for repair or replacement at no charge. Braun reserves the right to replace a non conforming product with the most comparable product currently available.

What is Braun Thermoscan 2424?

24 El termómetro Braun ThermoScan ha sido cuidadosamente diseñado para tomar la temperatura en el oído de una forma rápida, segura y precisa. La forma del termómetro está especialmente pensada para introducirse sólo lo necesario en el canal auditivo, evitando totalmente el contacto con el tímpano.

What is the operating ambient temperature range for the Braun Thermoscan thermometer?

• The operating ambient temperature range for this thermometer is 10–40 °C (50–104 °F). • Do not expose the thermometer to temperature extremes (below –20 °C / –4 °F or over 50 °C / 122 °F) nor excessive humidity (> 95 % RH). • This thermometer must only be used with genuine Braun ThermoScan Lens Filters (LF 40).