How do I enable the CD drive in Windows 10 registry?

Enable or Disable CD Burning in Windows 10

  1. Hold the Windows Key, then press “R” to bring up the Run dialog box.
  2. Type “regedit“, then press “Enter“.
  3. Navigate to the following registry key:
  4. Look for a key called “NoCDBurning”.

Why is my CD-ROM not reading discs?

A dirty or scratched disc surface is the most common reason for a CD/DVD issue when inserted into a computer. Check the disc for damage and confirm that the disc is compatible with your computer. Clean the disc and check for damage: Clean any dust or smudges from the disc with filtered water and a lint free cloth.

How do I enable a disabled CD drive?

How to enable the DMA settings of a hard disk drive, CD-ROM, CD-R/RW and DVD-ROM drive?

  1. Start Control Panel.
  2. Double-click System.
  3. Click the Device Manager tab.
  4. For hard disk drive, click to expand Disk Drive.
  5. Right-click on the necessary drive and click Properties.
  6. Click the Settings tab.
  7. Select the DMA option.

How do I test a CD-ROM drive?

If not, refer to the Dell Knowledge Base article Optical Drive is not recognized in Windows.

  1. Press the Windows key + R to open the Run dialog box.
  2. In the Run dialog box, type devmgmt. msc then press the Enter key.
  3. In the Device Manager window, expand DVD/CD-ROM drives. Verify that the optical drive is listed.

How do I force a CD drive to open?

In Windows 7 or Windows Vista, click Start , and then click Computer. In earlier versions of Windows, click Start, and then click My Computer. Right-click the icon for the disc drive that is stuck, and then click Eject. The disc tray should open.

How do I open CD ROM drive?

Use the following steps:

  1. Close any applications using the drive and then shut down the PC.
  2. Find the pinhole on the drive door.
  3. Bend part of the paperclip to a point. Insert the paperclip slowly until there is resistance, then gently push until the drive door is opened.
  4. Pull the drive tray out and remove the disk.

How do you fix a CD that is not detected?

To correct the problem and allow the software to detect the drive again, uninstall the CD/DVD recording software, restart the computer, reinstall the disc recording software, then restart the computer again.

How do you fix a DVD that is not recognized?

You can have a try on following methods.

  1. Make sure your DVD drive is correctly connected.
  2. Updates Windows 10 to the newest version.
  3. Reinstall the DVD drive.
  4. Remove IDE/ATAPI drivers.
  5. Fix corrupted registry entries.
  6. Create a registry subkey.
  7. Backup your system in case DVD drive missing again.

How do I unlock my CD drive in Windows 7?

Opening a CD or DVD drive tray that is stuck closed (Windows 7 and earlier)

  1. Restart the computer.
  2. If the keyboard has a disc Eject key, press it.
  3. In Windows 7 or Windows Vista, click Start , and then click Computer.
  4. Right-click the icon for the disc drive that is stuck, and then click Eject.