How do I connect to DWL-2100AP?

Access Point Mode

  1. Step 1: Using an Ethernet cable connect the DWL-2100AP to your PC.
  2. Step 2: Your computer will need to be in the same IP address range of the DWL-2100AP for configuration.
  3. Step 3: Open a web browser and type the IP address of the DWL-2100AP in the address bar (default is 192.168.

What is the default IP address of D-Link access point?

192.168.0.50
Note: The default IP address for most D-Link Access Points is 192.168. 0.50.

How to configure d-Link DWL-2100AP as an AP repeater?

Setup D-Link DWL-2100AP As Wireless Repeater

  1. Access D-Link DWL-2100AP. To Access the AP type 192.168.
  2. Click on Wireless button in the Home Page.
  3. Change the option to AP Repeater.
  4. Enable Wireless Security on the Wireless Range Expander.

How do I access my D-Link access point?

How to change a D-Link router to AP mode

  1. Connect a computer to the D-link router and launch a web browser.
  2. Visit the following router configuration page: http://192.168.0.1.
  3. You are prompted to enter a username and password.
  4. Click Setup > Local Network.
  5. Set the DHCP Mode to Off.
  6. Click Apply Changes.

What is client in Dlink router?

Client Mode allows the D-Link DWL-2100AP to become a wireless client to another AP or wireless router. Client mode allows any device with an Ethernet connection to connect to your wireless network, such as a printer, gaming console (Xbox, PS2), or a computer.

How do I find the IP address of my D-Link access point?

How to find the IP address of an Access Point?

  1. Start > Run > type: cmd (to enter command prompt)
  2. Type: ipconfig /all.
  3. In the list, find the line that is your “Default Gateway”, this is your primary router/access point.

How do I connect to Dlink router?

Go to setting in the Mobile, turn on Wi-Fi and wait until the mobile detects router name press the router name to connect. Under “Wireless and Networks”, press Wi-Fi make sure “Wi-Fi” is turned on. Wait until the mobile detects router name press the router name if prompted enter the Wi-Fi password and press Connect.

How do I access my D-Link router in AP mode?