How do I connect my Grandstream HT502?

Connect the RJ-11 telephone cable connected to your telephone into Phone 1 port on the HT502.

  1. Reconnect the plug into your cable or DSL modem and wait until the lights stabilize on that device.
  2. Connect the included power adapter to the HT502 power port and plug the power adapter into an electrical outlet in the wall.

What is grandstream HT502?

Grandstream HandyTone 502 – HT502. The Grandstream HandyTone 502 is a two-line analogue telephone adapter with a built-in single port wired 10/100Mbps LAN router and network address translation (NAT). It is reported to support both tone and pulse dial (a capability which was removed from the later HT702).

How do I factory reset my Grandstream HT502?

First locate the reset button on the back of the device. The Factory Reset button is recessed in the hole. Hold the recessed reset button down using something that is solid but small in diameter like a paperclip or push pin. Continue holding the button down.

How do I setup my Grandstream HT801?

Installing Grandstream HT801 ATA Devices

  1. Capture the device’s IP Address. Plug in an analog handset into the phone jack, go off-hook, listen for dial tone and dial “***” (three * tones).
  2. Reset the HT801 ATA to factory default.
  3. Configure the Grandstream HT801 ATA.
  4. Click the Advanced Settings menu.

How do I setup my Grandstream?

Guide: How to Set Up a Grandstream GXP2160

  1. Step 1: Get the IP of the phone. While you can setup everything through the display on the phone, it is a lot easier to manage through your web browser.
  2. Step 2: Log on to the phone’s web interface.
  3. Step 3: Set up your account.
  4. Step 4: Enter Network Settings.
  5. Step 5: Set Presence.

Is Grandstream a router?

Description. The GWN7000 is a powerful enterprise-grade multi-WAN Gigabit VPN router. Ideal for the enterprise, small-to-medium business, retail, education, hospitality and medical markets, the GWN7000 supports comprehensive WiFi and VPN solutions that can be shared across one or many different physical locations.

How do I connect my Grandstream HT812 to my router?

Insert one end of the Ethernet cable into the WAN port in the back of the Grandstream HT812. The symbol will look like a globe. Connect the other end of the Ethernet cable into a LAN port in your modem/router. Insert a standard telephone cable into the line 1 phone port at the back of the Grandstream HT812.

How do I find my Grandstream IP address?

Connect a computer directly to the LAN port on the Grandstream. Open a browser window on that computer and Navigate to http://192.168.2.1. Log in with the default password 123. The WAN IP Address will be displayed on the Status screen.

What is grandstream default password?

admin
The default login name for the administrator is “admin”, the default administrator password is also set to ”admin.” If you have changed the login password, you must use it to login to the web interface. In this case, if you forget the password, you can factory reset the unit to restore the default user login settings.

How do I reset my Grandstream AP?

Insert a pin or paperclip into the reset hole on the back of the GWN AP, and press for 7 seconds before releasing. Regardless of method, the GWN AP LEDs will blink red, then reboot to factory settings.

How do I setup my Grandstream device?