How do I configure my sagemcom modem?

How to connect to a wireless network (Windows 7)

  1. Click the wireless network icon.
  2. Select the wireless network you want to use (e.g., My Bell Network).
  3. Click Connect.
  4. For the security key, enter the password for the wireless network.
  5. Click OK.
  6. Wait while the computer connects to the network.

How do I setup my Optus sagemcom modem?

After you’ve plugged your modem in, please leave it switched on for at least 10 minutes to give it time to set up properly.

  1. Click on your web browser and type in newmodem.optus.com.au.
  2. Log in with your OptusNet username and password.
  3. Follow the prompts to activate your new modem.

How do I log into Optus sagemcom router?

OTHER OPTUS DSL MODEMS/ROUTERS

  1. Your modem must be switched on and connected to your computer (wired or wirelessly)
  2. Open your internet browser and go to this address: http://192.168.8.1.
  3. Enter the default username (if required): admin.
  4. Enter the default password (if required): password.

How do I Portforward my Optus router?

To forward a single port, you need to key in the same port number in both fields. Click the drop down list below “Protocol”. Click the required setting. Click the field below “Internal Port Start” and key in the port number of the device to which the external port numbers are to be forwarded.

How do I configure my spectrum router?

So, here is how you can set up your Spectrum Wi-Fi router:

  1. Step 1: Connect the modem to the cable outlet.
  2. Step 2: Connect the modem to the power cable.
  3. Step 3: Connect the modem to the router via Ethernet cable.
  4. Step 4: Connect the router to the power cable.
  5. Step 5: Connect your wireless device to Wi-Fi.

How do I change my Optus modem settings?

This can be found printed on the sticker on the back of your modem.

  1. Connect your PC, laptop, smartphone, or tablet to the modem.
  2. To access the modem settings web page, locate the admin IP address located on the bottom of your modem.
  3. You’ll now be connected to your modem’s settings page.

How do I setup my Optus NBN modem?

connect your address using NBN Fibre to the Basement or Node you’ll connect your Optus modem to the NBN wall socket. Plug the Power Adapter into a power point and the other end into your modem. Switch both on. Heads up: The modem will start its special synchronisation sequence, which can take up to 15 minutes.

How do I setup my Optus 4g WiFi modem?

Set up my modem for internet manually

  1. Click Tools.
  2. Click Options….
  3. Click Profile Management.
  4. Click New.
  5. Key in the required name for the data connection.
  6. Highlight Static.
  7. Highlight the field next to “APN”. If you’re an Optus Business customer: Key in yesbusiness.
  8. Click Save to save the data connection.

What is the user name and password for Optus router?

The default username for your Optus router is Administrator. The default password is admin. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

Where do I find port forwarding?

To forward ports on your router, log into your router and go to the port forwarding section. Next, enter the port numbers and your device’s IP address. Choose a forwarding protocol and save your changes. Note: If you don’t see a port forwarding option in your router’s settings, you might have to upgrade.