How do I clear IP SLA?

IP SLA- How to Restart or Clear Counters of IP SLA Statistics

  1. R1(config)#ip sla monitor restart 1 >>>>> where “1” is Entry number.
  2. R1(config)#ip sla restart 1 >>>>> where “1” is Entry number.
  3. Round trip time (RTT) Index 1Latest RTT: 2 milliseconds.
  4. Round trip time (RTT) Index 1Latest RTT: 2 milliseconds.

What is threshold in IP SLA?

Threshold is used to activate a response to IP SLA violation, e.g. send SNMP trap or start secondary SLA operation. In other words, the threshold value is only used to indicate over threshold events, which do not affect reachability but may be used to evaluate the proper settings for the timeout command.

What does IP SLA monitor do?

An IP service level agreement, or IP SLA, is a network measurement technology that uses active traffic monitoring data to analyze the performance of a network in real time. It collects time-based performance data that actively helps monitor and troubleshoot a network.

What is the use of IP SLA command?

IP SLAs is a feature included in the Cisco IOS Software that can allow administrators the ability to Analyze IP Service Levels for IP applications and services. IP SLA’s uses active traffic-monitoring technology to monitor continuous traffic on the network.

How does IP SLA work?

IP SLA (Internet protocol service level agreement) is a feature of the Cisco Internetwork Operating System (Cisco IOS) that allows an IT professional to collect information about network performance in real time.

Which IP SLA operation type is enhanced by the use of the IP SLAs responder?

UDP echo accuracy is enhanced by using the IP SLAs Responder at Device A, the destination Cisco device. If the destination device is a Cisco device, then IP SLAs sends a UDP datagram to any port number that you specified.

Why is IP SLA used?

IP SLA is used to track network performance like latency, ping response, and jitter, it also helps us to provide service quality.

What is SLA monitor Cisco?

Cisco IP SLA is a technology from Cisco that actively monitors traffic to measure the performance of the network by measuring critical parameters for traffic passing Cisco IOS software devices and other network application servers.

What is an IP SLA reaction?

IP SLAs Reaction Configuration IP SLAs reactions are configured to trigger when a monitored value exceeds or falls below a specified level or when a monitored event, such as a timeout or connection loss, occurs.

How to enable or disable reaction-alerts in Cisco IP SLAs?

ip sla enable reaction-alerts . To enable Cisco IP Service Level Agreements (SLAs) notifications to be sent to all registered applications, use the ip sla enable reaction-alerts command in global configuration mode. To disable IP SLAs notifications, use the no form of this command. ip sla enable reaction-alerts . no ip sla enable reaction-alerts

How to configure the SLA responder to automatically register with the source?

To configure a destination Cisco routing device or Cisco IP Service Level Agreements (SLAs) Responder to automatically register with the source upon configuration, use the ip sla responder auto-register command in global configuration mode. To disable automatic registration, use the no form of this command.

How do I enable/disable the IP SLAs responder for User Datagram Protocol?

To enable the Cisco IOS IP Service Level Agreements (SLAs) Responder for User Datagram Protocol (UDP) echo or jitter operations, use the ip sla responder udp-echo ipaddress command in global configuration mode. To disable the IP SLAs Responder, use the no form of this command. Destination IP address. Specifies the destination port number.