2022-08-06
How do I change the settings on my digital thermometer?
How do I change the settings on my digital thermometer?
Please follow the directions below: Step 1: Make sure the thermometer is off. Step 2: Press and hold the power button, and after about 5-7 seconds, the display screen will come back in turn: “℃/SET, ℉/SET”. Step 3: Release the power button as soon as the desired temperature unit appears on the display screen.
How do you use a sensor thermometer?
Using the NCIT:
- Hold the NCIT sensing area perpendicular to the forehead and instruct the person to remain stationary during measurement(s). ( See Figure 1)
- The distance between the NCIT and forehead is specific to each NCIT.
- Do not touch the sensing area of the NCIT and keep the sensor clean and dry.
How do I know if my thermometer is reading correctly?
To test your thermometer:
- Fill a tall glass with ice and add cold water.
- Place and hold the thermometer in the ice water for 30 seconds without touching the sides or bottom of the glass.
- If the thermometer reads 32°F, it is reading correctly and can be used.
How do you reset a thermometer gun?
To reset the unit, remove the batteries, wait 2 minutes and then re-install the batteries.
How do you change an infrared thermometer to Celsius?
How do I change units from °F to °C? (Non-Contact)
- Firstly ensure the thermometer is turned on, you can do this by pressing the trigger (power button).
- Press and hold the ‘Set’ button until you see the screen flash ‘F1’ then ‘Unit’
- In the top right corner, you will see either °F or °C flashing.
How do you change an infrared thermometer from Celsius to Fahrenheit Sejoy?
How To switch between Celsius to Fahrenheit using the SEJOY Infrared Thermometer
- Ensure the thermometer is off and then press and hold the start button for about three seconds.
- When you have reached the unit changing mode release the start button.
- Use the power button to change the measurement unit.