How do I add Relayd to OpenWrt?

Add Bridge Interface

  1. Menu -> Network -> Interfaces.
  2. Click Add new interface…
  3. Name of the new interface: stabridge.
  4. Protocol of the new interface: Relay bridge.
  5. Click Submit.
  6. Relay between networks: lan: and wwan:
  7. Local IPv4 Address: Example 192.168.100.1.
  8. Click ‘Save and Apply’

How to make repeater on OpenWrt?

Repeater Interface Go in the Interfaces page, we will now add the relayd interface that will join the lan and wwan interfaces. Click on Add New Interface. Write a name for it (repeater_bridge is the name I used in the example), and then choose Relay bridge in the Protocol of the new interface field. Click Submit.

How do I install Relayd?

8. Install relayd on router

  1. With the SSH client of your choice (e.g. PuTTY) connect to your router using ip address 192.168.15.1. Rember to connect as user root.
  2. Enter the password you set for OpenWrt in step 4.
  3. Do an pkg update:
  4. Install relayd.
  5. Install relayd protocol for LuCI.
  6. Activate relayd:
  7. End SSH session:

What is Relayd?

Relayd is a daemon (computer program that runs as a background process) used to relay and dynamically redirect incoming connections to a target host. Its main purpose in RUTxxx routers is to extend the wireless network.

What are OpenWrt interfaces?

OpenWrt routers have two types of LAN interface: wired Ethernet (IEEE802. 3 or RFC894 Ethernet II, Ethernet II being the most common) and wireless Ethernet (IEEE802. 11.) The wired LAN ports each map directly to a single switch port.

How do I change my LAN IP address on OpenWrt?

Web interface instructions

  1. Click on Network → Interfaces, then click on the Edit button of the LAN Network.
  2. In General Setup tab, in IPv4 address type in the desired static IP address for the LAN interface of your OpenWrt Router, if your main router’s address is 192.168.

What is Relayd conf?

relayd. conf is the configuration file for the relay daemon, relayd(8).