How configure MikroTik PPTP server?

MikroTik CHR: How to set-up PPTP VPN Server (+ video)

  1. Add Pool of IP-Addresses to be used with this service.
  2. Create “Profile”
  3. Enable PPTP Server.
  4. Accept incoming connections in the firewall:
  5. Enabling NAT in firewall for internet access:
  6. Setup binding interface based on username of the “caller”

What is PPTP server binding MikroTik?

PPTP is a secure tunnel for transporting IP traffic using PPP. PPTP encapsulates PPP in virtual lines that run over IP. PPTP incorporates PPP and MPPE (Microsoft Point to Point Encryption) to make encrypted links.

What is VPN in MikroTik router?

However, VPN (a virtual private network) will help you to access Mikrotik CCR router remotely without public IP addresses using a VPN client. You can configure VPN in any MikroTik Routerboard to access remotely from a different location.

How Connect VPN to mikrotik?

Log into the MikroTik router interface using the web browser or WinBox application, the IP address of the router is 192.168. 88.1 by default, login is admin with no password if haven’t changed previously. Go to “Interfaces” (left hand side menu), find you VPN connection. Right click on it and select “Enable”.

What port does MikroTik VPN use?

TCP port 1723
PPTP traffic uses TCP port 1723 and IP protocol GRE (Generic Routing Encapsulation, IP protocol ID 47), as assigned by the Internet Assigned Numbers Authority (IANA).

How create VPN tunnel in Mikrotik?

  1. Create a file and click Enabled.
  2. Enter the Mikrotik Router LAN Network for Src. Address.
  3. Enter the DrayTek Router LAN Network for Dst. Address.
  4. Select encrypt for Action.
  5. Select esp for IPsec Protocols.
  6. Select the proposal you just set up at the Step 1.
  7. Click OK.

How can create VPN in Mikrotik?

MikroTik L2TP VPN Setup

  1. Create PPP Profile. PPP > Profiles > Add New.
  2. Create PPP User. PPP > Secrets > Add New.
  3. Create L2TP Server Binding. PPP > Interface > Add New > L2TP Server Binding.
  4. Enable L2TP Server.
  5. Add Firewall Rules to allow IPsec.
  6. Edit IPsec default Policy Proposal.
  7. Edit IPsec default Peer Profile.