How can I make TP link Deco faster?

  1. Remove QoS settings: Deco APP>>>HomeCare or HomeShield>>>Turn off QoS Completely or remove all priority devices and set the max bandwidth at 1000Mbps or higher.
  2. Turn off the UPNP feature and SIP ALG feature in Deco APP>>>MORE>>>Advanced menu.

Why is my mesh WiFi so slow?

Problem. In a mesh network, every link, or “hop,” between routers will decrease the bandwidth by half. This happens because wireless links can only do one thing at a time – transmit or receive. In a long “chain” of mesh links, this results in a very slow connection from end to end.

Why does my Deco keep losing connection?

Unplug the main Deco from the modem, then reboot both devices. After they complete the reboot, connect Deco back to the modem for a check. 4. If the issue persists and if you have an old router, please set up the connection as below to check if it’s a compatibility issue between Deco and the modem.

Does mesh WiFi increase speed?

Your actual internet speed will depend on router placement, and the location of your other tech. While single-point routers do well in the speed category, mesh routers perform better when it comes to range. Because there are multiple routers, you’re going to get a more consistent signal spread across a larger area.

How can I speed up my Wi-Fi mesh?

To improve your Wi-Fi speed, try one or more of these steps: Move the connected device closer to your Wifi router or point. Run a mesh test to confirm placement of your Wifi points. Try to move your router or point to a more open or unobstructed location and your router or points closer to each other.

How do I fix disconnected Deco?

Reset the Satellite Deco (find the RESET button at the bottom of the Deco, press it for one second and then release), disconnect main Deco from modem, power off and on both main Deco and modem, wait a few minutes till modem completes reboot.

Why does my tp link adapter keep disconnecting?

If the USB WiFi Adapter keeps disconnecting from the router and drops the connection make sure it doesn’t get too hot. Update the drivers and change some power settings as we describe in the article. If you are having WiFi problems we got you covered.