How can I change my ADT smart lock code?

  1. Access the pulse portal system by navigating to portal.ADTPulse.com. Enter your username and password.
  2. Press the System tab on the control panel on the screen.
  3. Use the mouse to select Security Panel.
  4. Click on the Change Master Code option.
  5. Enter the new code in the box that appears in the pop-up screen.

How do I reset my vivint lock code?

Factory Reset:

  1. Remove the battery pack.
  2. Press and HOLD the Program button.
  3. Re-insert the battery pack (keep holding the Program button for 30 seconds). The lock should beep and the LED will flash red.
  4. Release and press the Program button once more.
  5. The lock will re-initiate the handing process (extend/retract the bolt).

How do you change the 4 digit code on a Kwikset lock?

It is recommended that you change it to a code of your own.

  1. Make sure the lock is unlocked and the door is open.
  2. Enter your Programming Code – for new installation, default is 0-0-0-0.
  3. Press enter arrow. You will hear one beep.
  4. Press 4 .
  5. Press enter arrow. You will hear one beep.
  6. Enter a new Programming Code.

How do you program a smart door lock?

How do I program my SmartCode 913 lock?

  1. Open the door.
  2. Remove battery cover.
  3. Press the program button once.
  4. Enter new user code.
  5. Press lock button.
  6. If programming is successful the keypad will flash green once, and you will hear one beep.

How do I reset my ADT trouble code?

The security system may need to be reset by entering your code into your system and hitting off twice. Remember to remove the system from Test Mode. Go to MyADT.com and click on My Alarm from the System Management option, select Stop Test to remove the system from test mode and restore operations.

How do I change my PIN on my Vivint panel?

Go! Control – Edit Users

  1. From the home screen of your Go! Control, tap Security.
  2. Tap Menu.
  3. Tap Toolbox.
  4. Tap User Codes.
  5. Enter your 4-Digit PIN.
  6. Choose the user you would like to edit.
  7. Enter the new PIN in the field provided. The panel will prompt you to enter it again to verify the new PIN.

What is the installer code for Vivint?

2203
To send basic commands to other devices, follow these instructions from the settings tab (see Figure 1): 1. Select “Devices” 2. Enter the default installer PIN code (2203) 3.