Does Square D make a 30 amp breaker?

Does Square D make a 30 amp breaker?

Square D Homeline 30-Amp 2-Pole Standard Trip Circuit Breaker.

How much is a 30 amp Square D breaker?

Compare Similar Single Pole Breakers

Can I replace a 20 amp breaker with a 30 amp breaker?

The answer is, “No, do not put a 30 Amp breaker in place of a 20 Amp breaker because the wiring is most likely’sized’ for the 20 Amp load and -may- overheat if a 30 Amp load is used with wiring sized for a 20 Amp load.”

What size wire do I need for a 30 amp single pole breaker?

A 30-amp single-pole and double-pole breakers require a minimum of 10-gauge wire.

Can you use a 30 amp breaker for a electric stove?

Because most stoves are 240 volts, it is best to use a double-pole circuit breaker on a dedicated circuit inside your electrical panel. Electric stoves often require a 30 to 60 amp circuit breaker.

How many outlets and lights can I put on a 30 amp breaker?

The NEC states that you can only have 30-amp receptacles on a 30-amp circuit. If it’s a multi-outlet circuit, you can have a 20-amp breaker protecting the #10 conductors and use 15amp and 20amp receptacles on the circuit.

How many breakers can I put in a 30 amp subpanel?

The amount of current that is required for the connected loads can only be supported by a 30 Amp sub-panel. The maximum quantity of branch circuits can be determined with a load calculation. Two 15amp breakers or one 15amp and one 20amp can be used on a 30amp circuit.

What is a single pole 30 amp breaker used for?

The Square D by Schneider Electric Homeline 30 Amp One-Pole Circuit Breaker is used for overload and short circuit protection. Homeline load centers are compatible with this breaker. The unit is rated for 120/240 VAC and 10,000AIR.